# Service bulletin N192282480

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10171420
- Published by NHTSA: 2020\-02\-18
- Manufacturer's number: N192282480
- Manufacturer's date: 2020\-01\-16
- NHTSA component: ELECTRICAL SYSTEM; STRUCTURE; BACK OVER PREVENTION

## NHTSA's summary

Customer Satisfaction Program. Certain vehicles, may have several wires going to the body control module \(BCM\) damaged due to the installation/removal of the aftermarket LoJack alarm system from the vehicle. Dealer will inspect the wires going to the BCM and knee bolster for evidence that a LoJack alarm system was removed and repair as necessary.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2020/MC-10171420-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2020/MC-10171420-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Driver assistance, Electrical system, Backup camera

## Vehicles listed

- 2019 BUICK ENCLAVE
- 2019 BUICK ENCORE
- 2019 GMC ACADIA
- 2019 GMC CANYON
- 2019 GMC SIERRA 1500
- 2019 to 2020 GMC TERRAIN
- 2019 GMC YUKON
- 2019 GMC YUKON XL

## Other bulletins for the same vehicles and component

- [22\-NA\-068](/bulletins/11014579.md), 2025-02-28, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY; BACK OVER PREVENTION: WARNINGS. This technical bulletin provides repair information to correct a customer concern of Diagnostic Tips For Park Assist Off Message / Unwanted Or False Park Assist Alerts / No DTCs.
- [PIT5697D](/bulletins/11011687.md), 2024-12-09, Service bulletin: UNKNOWN OR OTHER; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up\-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
- [PIT6140](/bulletins/10253100.md), 2024-04-15, Service bulletin: BACK OVER PREVENTION. This preliminary information discusses potential camera functional issues if the camera is not properly programmed.
- [18\-NA\-176](/bulletins/10249611.md), 2024-02-02, Service bulletin: ELECTRICAL SYSTEM; BACK OVER PREVENTION: SENSING SYSTEM: RADAR. This technical bulletin provides a procedure to add reflective butyl tape to the rear driver's side module to correct the radar reflection being detected and triggering the false alerts.
- [PIT5386J](/bulletins/10249298.md), 2024-01-29, Service bulletin: BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back\-up alarm inoperative during the Pre\-Delivery Inspection. On trucks equipped with the Back Up Alarm \(RPO 8S3\), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
- [PIP5847B](/bulletins/10247363.md), 2023-12-18, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin.
- [PIT5931C](/bulletins/10246001.md), 2023-12-04, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification.
- [PIT5931B](/bulletins/10245991.md), 2023-12-04, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification.
- [PIP5847A](/bulletins/10242281.md), 2023-09-18, Service bulletin: BACK OVER PREVENTION. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin.
- [PIT5990A](/bulletins/10240782.md), 2023-08-21, Service bulletin: BACK OVER PREVENTION; STRUCTURE. This Preliminary information communicates an issue with a wind noise while driving at highway speeds and dealers are to inspect the body harness pass through for being full seated into the cowl.

JSON: [/v1/bulletins/10171420](/v1/bulletins/10171420)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20N192282480&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10171420&vehicle=Service%20bulletin%20N192282480)