WenmarOpen by Wenmar Pro

Service bulletin SA-015-20

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10170937
Published by NHTSA2020-02-04
Manufacturer's numberSA-015-20
Manufacturer's date2020-01-23
NHTSA componentELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

Some customers may complain about a MyMazda App 400C04 error when enrolling their vehicle to connected vehicle services.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Software

Vehicles listed
MAZDA CX-302020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SA-004-22b2022-06-04. Service bulletin. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-003-22d2022-04-06. Service bulletin. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest repair information as it becomes available.
SA-003-20f2021-01-06. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-031-20j2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-031-20i2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
07-005-20-37452020-11-03. Service bulletin. Some customers may complain that the A/C blows warm air while idling after restarting a warm engine. This is caused by improper control software of the PCM not allowing the active air shutter to open properly, resulting in lower cooling performance at idle. To eliminate this concern, the control software of the PCM has been modified.
16-001-20-3683c2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility.
16-001-20-3683b2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility. 16-001-20-3683c
SA-066-202020-10-05. Service bulletin. When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always do the following: • Use the GR8 battery charger SST to maintain battery voltage. See SA-063/20. • Use M-MDS hardware that is in good working condition. CAUTION: If the GR8 is not used or if the M-MDS hardware is not in good working condition, a control unit failure may occur.
SA-027-20c2020-08-05. Service bulletin. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.