# Service bulletin MC110119

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10170594
- Published by NHTSA: 2020\-01\-21
- Manufacturer's number: MC110119
- Manufacturer's date: 2019\-12\-01
- NHTSA component: ENGINE

## NHTSA's summary

On a limited number of engines for the S 1000 RR \(K67\), there were two deviations that occurred during the machining work on the crankcase lower section.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10170594-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10170594-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2014 BMW S 1000 RR
- 2010 to 2013 BMW S1000 RR
- 2015 to 2020 BMW S1000 RR

## Recalls for the same vehicles and component

- [2024705](/recalls/tc/2024705.md), 2024-11-19: Engine
- [2019489](/recalls/tc/2019489.md), 2019-10-03: Engine
- [19V697000](/recalls/nhtsa/19V697000.md), 2019-10-02: ENGINE
- [2012140](/recalls/tc/2012140.md), 2012-04-24: Engine
- [12V177000](/recalls/nhtsa/12V177000.md), 2012-04-20: ENGINE AND ENGINE COOLING:ENGINE

## Other bulletins for the same vehicles and component

- [MC110322](/bulletins/10242927.md), 2023-10-01, Service bulletin: ENGINE AND ENGINE COOLING. During the production of the intake camshaft there was a change in the coolant used to prevent localized overheating of parts of the camshaft. Because of this, certain parts of the camshaft may have a changed surface hardness that can result in increased wear of the rocker arms and camshaft over time.
- [TEC26](/bulletins/10216793.md), 2022-08-01, Service bulletin: ENGINE AND ENGINE COOLING. TEC26 Turbo Charger Return
- [SIM110115](/bulletins/10216758.md), 2022-08-01, Service bulletin: ENGINE AND ENGINE COOLING. MINI engine oil part number transition and model year 2016 engine oils
- [SIM010717](/bulletins/10215024.md), 2022-07-05, Service bulletin: ENGINE AND ENGINE COOLING. The engine?s intake charge\-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
- [MC170122](/bulletins/10212535.md), 2022-05-31, Service bulletin: ENGINE AND ENGINE COOLING:COOLING SYSTEM. Installation of the accessory oil cooler guard from the BMW Motorrad Special Accessories Catalog may result in chafe marks on the cooler.
- [MC000621](/bulletins/10200254.md), 2021-08-09, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE. BMW Motorrad USA is pleased to announce the launch of the BMW Motorrad Ultimate Care Program, effective June 23 , 2021. Three different plans will be offered for consumer bikes, as well as two Authority\-specific plans. Model\-year 2020 and newer BMW Motorcycles from the time of retail up to the first scheduled ?break in? service are eligible.
- [MC610621](/bulletins/10194318.md), 2021-05-24, Service bulletin: ENGINE; ELECTRICAL SYSTEM. Warning light in the instrument cluster for DCC failure in motorcycles equipped with DCC
- [MC65238240](/bulletins/10188979.md), 2021-03-15, Service bulletin: ENGINE AND ENGINE COOLING. During a cold start or while idling in neutral after a brief standstill, the engine runs at higher revolutions, sounds irregular and as if there are misfires \(i.e. as if it were only running on 3 cylinders\).
- [MC610220](/bulletins/10181239.md), 2020-10-19, Service bulletin: ENGINE; ELECTRICAL SYSTEM. The engine wiring harness may chafe on the honeycomb structure of the frame. In case of damage to thewiring harness, the wake\-up line of the instrument cluster will be damaged. The instrument cluster will nolonger be activated with "Ignition ON?.
- [MC110220](/bulletins/10177639.md), 2020-07-27, Service bulletin: ENGINE AND ENGINE COOLING. On the S 1000 models, the seal for the coolant circuit of the oil/coolant pump was manufactured from an incorrect material. This could lead to a minor leakage of coolant into the oil circuit. The oil/coolant pump must be replaced.

JSON: [/v1/bulletins/10170594](/v1/bulletins/10170594)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20MC110119&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10170594&vehicle=Service%20bulletin%20MC110119)