# Service bulletin 9004194

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10170337
- Published by NHTSA: 2020\-01\-21
- Manufacturer's number: 9004194
- Manufacturer's date: 2019\-12\-18
- NHTSA component: LATCHES/LOCKS/LINKAGES

## NHTSA's summary

Latch, Quarter Window, Power Sliding Roof Prior to ordering this part for customers that complain about a buzz, squeak, or rattle, please reference the repair information in the service library. Latch rattles can be repaired by applying UHMW tape to the receiver.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10170337-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10170337-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Latches and locks

## Vehicles listed

- 2018 to 2019 JEEP WRANGLER

## Recalls for the same vehicles and component

- [18V786000](/recalls/nhtsa/18V786000.md), 2018-11-08: LATCHES/LOCKS/LINKAGES:DOORS:LATCH

## Other bulletins for the same vehicles and component

- [S1808000233 Rev.](/bulletins/10188725.md), 2021-03-15, Service bulletin: LATCHES/LOCKS/LINKAGES:DOORS:LATCH PLATE; STRUCTURE:BODY:DOOR; EQUIPMENT. The Passive Entry Door Handle Does Not Unlock The Door And B25A3\-00 Or B25A4\-00 May Be Active
- [S1808000284](/bulletins/10176515.md), 2020-06-22, Service bulletin: LATCHES/LOCKS/LINKAGES:DOORS:LATCH; ELECTRICAL SYSTEM; EQUIPMENT. Blind Spot Alert Temporarily Unavailable Is Displayed On The EVIC. Power Mirrors And/Or Power Door Locks Do Not Function
- [9004175](/bulletins/10169156.md), 2019-12-16, Service bulletin: LATCHES/LOCKS/LINKAGES; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. LATCH, Folding Top For a concern of a loose latch in the closed position, it is not necessary to replace the latch unless broken. Refer to instructions in service library. The position of the receiver attached to the vehicle header can be adjusted to change the ammount of force required to latch.

JSON: [/v1/bulletins/10170337](/v1/bulletins/10170337)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209004194&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10170337&vehicle=Service%20bulletin%209004194)