# Service bulletin 2039914/1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10170167
- Published by NHTSA: 2020\-07\-28
- Manufacturer's number: 2039914/1
- Manufacturer's date: 2015\-03\-02
- NHTSA component: LATCHES/LOCKS/LINKAGES; STRUCTURE

## NHTSA's summary

15MY power boot PDI check \(SC15/05\) Technical background A significant design change has occurred on Continental GT and Continental GT Convertible power boot systems built from 15MY onwards. The striker is now powered whereas previously the latch was powered, and the ECU software for the close\-cycle of the boot lid is modified. Due to these fundamental changes a different approach is required in rectifying issues. In a few cases, during manufacturing profile adjustment to the boot lid, the boot lid function may have been compromised The Pre Delivery Inspection \(PDI\) for 15MY onwards includes a specific function check for the power boot. In the event of a power boot failure to latch event during this specific 15MY PDI check then the rectification detailed for outcome of this campaign should be applied Remedy Check boot lid function and if necessary adjust boot lid striker and report adjustment

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2015/MC-10170167-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2015/MC-10170167-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Latches and locks

## Vehicles listed

- 2015 BENTLEY CONTINENTAL GT
- 2015 BENTLEY CONTINENTAL GT CABRIO

## Other bulletins for the same vehicles and component

- [2075786/3](/bulletins/11035283.md), 2026-07-29, Service bulletin: STRUCTURE:BODY; SEAT BELTS; AIR BAGS; ELECTRICAL SYSTEM. Airbag, fire, accident \(safety\-related enquiry \- reporting forms\) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models \- every model year.
- [2075786/2](/bulletins/11024627.md), 2025-10-30, Service bulletin: ENGINE; ELECTRICAL SYSTEM; STRUCTURE:BODY; SEAT BELTS; AIR BAGS. Airbag, fire, accident \(safety\-related enquiry \- reporting forms\). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models \- every model year.
- [2069806/7](/bulletins/11023959.md), 2025-10-07, Service bulletin: VISIBILITY/WIPER; ELECTRICAL SYSTEM; STRUCTURE:BODY. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin \- Diagnosis guidelines
- [2075786/1](/bulletins/11019283.md), 2025-06-06, Service bulletin: UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM; AIR BAGS; SEAT BELTS. Airbag, fire, accident \(safety\-related enquiry \- reporting forms\). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models \- every model year.
- [2076639/2](/bulletins/11018074.md), 2025-05-07, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Infotainment Upgrade Unit Diagnosis \| Continental GT/GTC and Flying Spur. Condition: Failure evident with Bentley Information Upgrade Unit. Technical Background: The attached document is to aid diagnosis for any faults that may be found within the Bentley Infotainment Upgrade Unit.
- [2056407/6](/bulletins/11015368.md), 2025-03-08, Service bulletin: STRUCTURE:BODY; SUSPENSION; STEERING. Running gear \- Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
- [2052092.7](/bulletins/10244628.md), 2023-11-06, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. New Continental GT/C \- Door 'soft close' functionality Customer Statement: \-Correct functionality and restrictions of the door soft close system need to be understood to prevent unnecessary customer complaints.
- [2069806/4](/bulletins/10242269.md), 2023-10-06, Service bulletin: EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; STRUCTURE. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin \- Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. \- Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/\- \- Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
- [2068646.1](/bulletins/10228744.md), 2023-01-06, Service bulletin: SEAT BELTS; STRUCTURE. Rattle Rear Cabin Area \- Seat Belt Assembly Customer Statement: \-Rattle from rear of passenger compartment, rear quarter panel area Technical Background: \-Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle in the rear quarter panel area
- [2040267/4](/bulletins/10222168.md), 2022-10-01, Service bulletin: STRUCTURE; SEAT BELTS. Rattle Rear Cabin Area \- Seat Belt Assembly Technical Background: Metal to metal contact between the front seat belt mounting plate and the seat belt reel housing can result in a rattle the rear quarter panel area. Service: On receipt of a qualified customer complaint referencing rattle in one or both the rear quarter areas and that rattle can be attributed to the front seat belt mount assembly located in the rear quarter panel then carry out the following procedure. The procedure should be performed on both the right hand and the left hand front seat belt reel / mounting plate assemblies

JSON: [/v1/bulletins/10170167](/v1/bulletins/10170167)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202039914%2F1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10170167&vehicle=Service%20bulletin%202039914%2F1)