Service bulletin TSB-15-13-001RE2
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10170073 |
| Published by NHTSA | 2020-01-28 |
| Manufacturer's number | TSB-15-13-001RE2 |
| Manufacturer's date | 2015-08-25 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
Due to a rich air fuel ratio, affected vehicles may experience engine stalling at low engine speed, just prior to stopping or during idling, when operated in high ambient temperature conditions, which may lead to PCV hose disconnection. If this condition were to occur, a stalled engine can immediately be restarted. This TSB instructs dealers to reprogram the ECM with new software that optimizes the air fuel ratio.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| MITSUBISHI MIRAGE | 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TECH TALK 290 | 2026-03-04. Other. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications. |
|---|---|
| TECH TALK 287 | 2025-08-08. Other. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications. |
| TSB-22-11-001 | 2022-05-09. Service bulletin. This Technical Service Bulletin was sent to dealers to provide an update to the Engine and Intake Manifold section of the affected Service Manuals and advises of new flange bolts available for use. |
| TIN-16-11-001 | 2021-05-24. Service bulletin. Affected Vehicles: 2014-2015 Mirage - Temporary back order of Long Block Engine Part Number listed in SC-16-001REV. This is a drefsult of higher than expected demand resulting from diagnosis of the knocking noise as outlined in the Service Campaign Bulletin. |
| SC-16-001REV | 2021-05-24. Service bulletin. ECM Reprogramming for engine knocking noise - Service Campaign - Revised This bulletin supercedes SC-16-001, issued February, 2016 to add a Code 209 Restriction on new engines, detailed procedures required by dealers before ordering a new engine, and a Sample customer letter. Revisions are italicized and indicated by - During cold start, the engine ECU may order inappropriate fuel amounts which may cause efangine noise. |
| SC-16-001 | 2021-05-24. Service bulletin. EMC Reprogramming for engine knocking noise - Service Campaign - During cold start, the engine ECU may order inapprokpriate fuel amounts which may caus e engine noise. This campaign bulletin instructs dealers to reprogram the ECM with new software on all affected vehicles. In rare cases, if the vehicle exhibits an enggine knocking noise, the fengine may need to be replaced. |
| TSB-20-15-002 | 2020-12-08. Service bulletin. Technical Service Bulletin informing dealers an abnormal noise coming from the exhaust area and may occur due to vibration between the exhaust hanger and body side bracket and intructs dealers to replace the two identified hanger rubber parts with new parts. |
| SC-16-001REV2 | 2020-12-08. Service bulletin. This Service Campaign Bulletin was sent as a revision to SC-16-001REV instructs dealers to reprogram the ECM with new software on all affected vehicles. In rare cases, if the vehicle exhibits an engine knocking noise, the engine may need to be replaced. |
| ATIN-16-SC-001-C | 2020-12-07. Service bulletin. ECM reprogramming for engine knocking noise service campaign revised. |
| TIN-16-11-001 | 2020-12-07. Service bulletin. There is a temporary back order of the long block engine. |