# Service bulletin 9004158

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10168392
- Published by NHTSA: 2019\-12\-02
- Manufacturer's number: 9004158
- Manufacturer's date: 2019\-10\-30
- NHTSA component: STRUCTURE

## NHTSA's summary

Door Handle, Front or Rear Exterior If the vehicle is in for front or rear door outside handle frozen and will not open, please contact Kevin Murphree at \(248\) 613\-3417. If no response in 15 minutes, proceed with repair.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10168392-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10168392-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame

## Vehicles listed

- 2019 JEEP COMPASS

## Other bulletins for the same vehicles and component

- [S2623000040](/bulletins/11033896.md), 2026-06-16, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
- [S2523000003 REV.A](/bulletins/11031688.md), 2026-04-29, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Door Latch, Handle And Ajar Additional Service Information.
- [08\-075\-26](/bulletins/11029670.md), 2026-03-05, Service bulletin: STRUCTURE:BODY; ELECTRICAL SYSTEM. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water \(such as rain, or the water from a vehicle wash\). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight \(i.e. a warm humid day followed by clear cool night\). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
- [109230](/bulletins/11027648.md), 2026-01-14, Service bulletin: STRUCTURE:BODY. LATCH \- LIFTGATE
- [31\-001\-25 REV. A](/bulletins/11022012.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
- [31\-001\-25 REV. B](/bulletins/11022011.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
- [31\-001\-25](/bulletins/11022003.md), 2025-08-21, Service bulletin: STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
- [105770](/bulletins/11021586.md), 2025-08-06, Service bulletin: STRUCTURE:BODY. PROP \- LIFTGATE
- [08\-220\-25](/bulletins/11021010.md), 2025-07-31, Service bulletin: STRUCTURE:BODY. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water \(such as rain, or the water from a vehicle wash\). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight \(i.e. a warm humid day followed by clear cool night\). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
- [S2523000003](/bulletins/11012884.md), 2025-01-16, Service bulletin: STRUCTURE:BODY. Door Latch, Handle And Ajar Additional Service Information.

JSON: [/v1/bulletins/10168392](/v1/bulletins/10168392)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209004158&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10168392&vehicle=Service%20bulletin%209004158)