Service bulletin MSP27
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10168122 |
| Published by NHTSA | 2019-11-21 |
| Manufacturer's number | MSP27 |
| Manufacturer's date | 2019-11-14 |
| NHTSA component | ELECTRICAL SYSTEM:SOFTWARE; STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS; LATCHES/LOCKS/LINKAGES:DOORS:LATCH; EQUIPMENT |
NHTSA's summary
Mazda Motor Corporation has decided to conduct a Mazda Service Program (MSP) on certain 2019 Mazda3 5HB vehicles produced from November 6, 2018 through May 28, 2019. Concern Outline: On certain subject Mazda3 5HB vehicles with the advanced keyless function, all doors, fuel filler door, and the liftgate can be locked by pressing the door-lock switch on the liftgate. If the liftgate door-lock switch is pressed with the transmitter/key left inside the vehicle, all doors will lock and cannot be unlocked from the outside. The liftgate can be unlocked using the liftgate opener because of the lock-in prevention function. This was the original design of the vehicle with advanced keyless function, but the original design does not match customer’s expectation. It is difficult to retrieve the keys inside the vehicle through the liftgate especially if the rear seats are blocked (with two child seats, luggage etc.). Action Required: Reprogram the body control module (BCM) and low-frequency control unit (LFU) with M-MDS using Mazda Diagnostic and Repair Software (MDARS) for all affected Mazda3 5HB vehicles in dealer inventory, and when customers bring their vehicles for maintenance, or other service/warranty work. The subject vehicles should not be delivered to customers until the repair of MSP56 is completed. Please inform the customer that the BCM and LFU will be reprogrammed to the modified calibration, free of charge. The modified calibration prevents the vehicle from being locked if the keys are still inside. The dealer inventory list will be posted to MGSS by the end of today. Inventory vehicles sold with MSP56 in open status will have any PDI New Car Ready claim debited.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Electrical system, Equipment and accessories, Latches and locks, Door latch, Software
| MAZDA MAZDA3 | 2019 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-004-22b | 2022-06-04. Service bulletin. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. |
|---|---|
| SA-003-22d | 2022-04-06. Service bulletin. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest repair information as it becomes available. |
| SA-003-20f | 2021-01-06. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| SA-031-20j | 2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| SA-031-20i | 2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| 09-013-20-3663c | 2020-12-03. Service bulletin. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. |
| 09-013-20-3663b | 2020-11-04. Service bulletin. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. • Japan built vehicles: BDGF-67CK2-B or later suffix. • Mexico built vehicles: BDTS-67CK2-A or later suffix. NOTE: The Description for DTC U2050:55-TCU will be added to MGSS. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. When you encounter this concern, reprogram (update) the BCM and the CMU to the latest version. |
| 07-005-20-3745 | 2020-11-03. Service bulletin. Some customers may complain that the A/C blows warm air while idling after restarting a warm engine. This is caused by improper control software of the PCM not allowing the active air shutter to open properly, resulting in lower cooling performance at idle. To eliminate this concern, the control software of the PCM has been modified. |
| 16-001-20-3683c | 2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility. |
| 16-001-20-3683b | 2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility. 16-001-20-3683c |