WenmarOpen by Wenmar Pro

Service bulletin 19-BE-016H

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10167252
Published by NHTSA2019-11-06
Manufacturer's number19-BE-016H
Manufacturer's date2019-10-11
NHTSA componentELECTRICAL SYSTEM; VISIBILITY

NHTSA's summary

Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: · C2702 Control Module Missing Calibration · C2703 Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Glass, wipers and mirrors

Trouble codes named

C2702, C2703

Vehicles listed
HYUNDAI ELANTRA2019

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
9D3 OL2026-09-11. Service campaign. Hyundai has become aware that your Hyundai Elantra equipped with a 2.0 ATK engine may have been incorrectly updated with Cylinder Noise Detection System (CNDS) software intended only for Korean-built Elantra vehicles and may not meet specifications.
26-01-039H DN2026-08-15. Service campaign. Certain Elantra (ADA) vehicles may have been incorrectly updated with Cylinder Noise Detection System (CNDS) software that can set DTC P132700; this software was intended only for Korean-built Elantra (AD) vehicles. In addition, the California Air Resources Board has determined that these vehicles may be releasing air pollutants which exceed Federal and California standards.
26-01-039H TSB2026-08-15. Service campaign. Certain Elantra (ADA) vehicles may have been incorrectly updated with Cylinder Noise Detection System (CNDS) software that can set DTC P132700; this software was intended only for Korean-built Elantra (AD) vehicles. This bulletin provides instructions to perform a software update for the Engine Control Module (ECM) to revert to the original ROM ID, apply the emissions label under the hood, and provide the vehicle owner with Proof of Correction.
25-01-089H DCS2026-01-06. Other. Upon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. This repair procedure is being provided in addition to the previous Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1).
25-01-089H DN2026-01-06. Other. In addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental security measure is to be installed at the ignition switch location and provides additional protection against the social media theft method. Vehicles not equipped with an immobilizer during production at the factory are eligible. The repair procedure shall be performed and claimed upon customer request only. Any future repairs to these vehicles in which an installed ignition cylinder protector impacts required parts and/or labor, shall be covered by HMA. Please see TSB 25-01-089H for details.
25-01-089H TSB2026-01-06. Other. This bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.
P33 OL2025-12-19. Other. In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.
25-01-054H DN2025-08-19. Service campaign. Certain 2017-2019MY Elantra (AD, ADA) vehicles equipped with 2.0L ATK engines may be unable to complete diagnosis of the OBD-II Fuel System Readiness Monitor. This bulletin provides instructions to perform a software update for the Engine Control Module (ECM) to revise control logic.
25-01-054H2025-08-19. Service campaign. Certain 2017-2019MY Elantra (AD, ADA) vehicles equipped with 2.0L ATK engines may be unable to complete diagnosis of the OBD-II Fuel System Readiness Monitor. This bulletin provides instructions to perform a software update for the Engine Control Module (ECM) to revise control logic.
25-01-024H-1 TSB2025-05-27. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.