Service bulletin 9004114
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10166539 |
| Published by NHTSA | 2019-10-28 |
| Manufacturer's number | 9004114 |
| Manufacturer's date | 2019-08-07 |
| NHTSA component | BACK OVER PREVENTION |
NHTSA's summary
CAMERA, Surround View Customer's complaining that their surround view camera image is blurry (sales code XAK) please contact, Sam Tkac at (248) 821-7819 or Bing Guo at (248) 500-7355 If no response in 15 minutes, proceed with repair. 1. Take a camera image picture on the radio screen and compare to the image of other cameras in the vehicle 2. Verify that the camera is clean, with no scratch or damage on the lens, no moisture or foreign material inside the camera 3. Disconnect and reconnect the camera 4. Swap the blurry camera with a known good camera, (or install the camera in a different position) 5. Verify / update radio software and perform a WiTech ECU reset
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| RAM 1500 | 2019 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 20V191000 | 2020-09-10. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 96C Combo | 2025-09-24. Service campaign. Customer Satisfaction Notification 96C – Park Assis Module - Dealer Notification |
|---|---|
| 103289 | 2025-03-04. Service bulletin. CAMERA - REAR VIEW |
| S2208000045 REV.B | 2024-12-11. Service bulletin. Backup Camera Poor Image Quality Inspection |
| 0900124 | 2024-03-18. Service bulletin. Cold Engine Ticking Noise The customer may describe a ticking noise from the exhaust manifold location(s) when cold. This bulletin involves replacing the exhaust manifolds. |
| S2025000001 | 2024-01-02. Service bulletin. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set. |
| 9003357 | 2024-01-02. Service bulletin. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |
| 0901923 | 2023-12-18. Service bulletin. Cold Engine Ticking Noise From Exhaust Manifold Area The customer may describe an ticking noise from the exhaust manifold location(s) when cold. This bulletin involves replacing the exhaust manifolds. |
| 9100247 | 2023-12-18. Service bulletin. ERG Hydraulic Tensioner Before replacing any FEAD components, please check FEAD belt layout as per the engine sales code. Customer complaint may include a noise from under the hood described as a squeal, screech, squeak, chirp or belt-related noise and/or noisy tensioner/pulley. Please refer to SOL# S2309000007. |
| S2023000037 | 2023-10-02. Service bulletin. Wind Whistle Noise From Dash A Pillar Area While Driving |
| S1808000152 | 2023-10-02. Service bulletin. CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance |