# Service bulletin 02\-183\-19

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10165544
- Published by NHTSA: 2019\-10\-01
- Manufacturer's number: 02\-183\-19
- Manufacturer's date: 2019\-09\-26
- NHTSA component: STRUCTURE; ENGINE AND ENGINE COOLING

## NHTSA's summary

This Service Information Bulletin clarifies a bolt tightening sequence procedure for the three \(3\) turbocharger stay bracket mounting bolts. Torsional stress may remain in the stay bracket if the tightening sequence is not followed. The applicable Service Manual will be updated with this information soon.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10165544-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10165544-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Engine

## Vehicles listed

- 2019 SUBARU ASCENT

## Recalls for the same vehicles and component

- [2019604](/recalls/tc/2019604.md), 2019-12-02: Engine
- [19V856000](/recalls/nhtsa/19V856000.md), 2019-12-02: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE \(PCV\)
- [18V508000](/recalls/nhtsa/18V508000.md), 2018-08-02: STRUCTURE:BODY:ROOF AND PILLARS

## Other bulletins for the same vehicles and component

- [09\-141\-26](/bulletins/11037946.md), 2026-10-05, Service bulletin: ENGINE; ELECTRICAL SYSTEM. This Bulletin provides a diagnostic procedure for customer concerns about hesitation, reduced acceleration, or lack of power when driving uphill or under heavy engine load.
- [05\-62\-18R](/bulletins/11036822.md), 2026-09-03, Service bulletin: STRUCTURE:BODY. This bulletin provides a procedure to address customer concerns of surface rust accumulating in the top center retaining nut area of the front strut mounts. This is an revised version of the original bulletin.
- [09\-98\-22R](/bulletins/11036821.md), 2026-09-03, Service bulletin: ENGINE; ELECTRICAL SYSTEM. This bulletin announces the availability of new reprograming files for the Engine Control Module \(ECM\) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs listed above are found to be stored in the ECM, follow the procedures outlined in the bulletin. This is an revised version of the original bulletin.
- [02\-196\-26R](/bulletins/11036811.md), 2026-09-03, Service bulletin: ENGINE. This service bulletin outlines the diagnostic and repair procedure for white smoke emitted from the exhaust after startup. This is an revised version of the original bulletin.
- [SubaruNet Announcement \(P](/bulletins/11035661.md), 2026-08-04, Other: STRUCTURE:BODY; UNKNOWN OR OTHER. WRH\-26 Certification Label Non\-Compliance Recall\- Parts and SSLP Process Updates.
- [02\-193\-24R](/bulletins/11034269.md), 2026-07-02, Service bulletin: ENGINE. This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components \(e.g. intake valves and / or manifold, and combustion chambers\). \(This is an revised version of the original bulletin.\)
- [09\-74\-21R](/bulletins/11034264.md), 2026-07-02, Service bulletin: ENGINE; FUEL/PROPULSION SYSTEM. This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components \(e.g. intake valves and / or manifold, and combustion chambers\). \(This is an revised version of the original bulletin.\)
- [02\-196\-26](/bulletins/11034257.md), 2026-07-02, Service bulletin: ENGINE. This bulletin outlines the diagnostic and repair procedure for white smoke emitted from the exhaust after startup.
- [09\-130\-25R](/bulletins/11034243.md), 2026-07-02, Service bulletin: ENGINE. This bulletin announces the design change made to the exhaust manifold flange nut material that has been changed from stainless steel to medium carbon steel. This change also necessitates a revised tightening torque specification. \(This is an revised version of the original bulletin.\)
- [02\-193\-24R](/bulletins/11033065.md), 2026-06-01, Service bulletin: ENGINE. This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components \(e.g. intake valves and / or manifold, and combustion chambers\).

JSON: [/v1/bulletins/10165544](/v1/bulletins/10165544)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2002-183-19&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10165544&vehicle=Service%20bulletin%2002-183-19)