WenmarOpen by Wenmar Pro

Service bulletin TJ32169 11 0 201

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10165235
Published by NHTSA2019-09-23
Manufacturer's numberTJ32169 11 0 201
Manufacturer's date2019-08-28
NHTSA componentPOWER TRAIN

NHTSA's summary

This is a Technical Journal: rough shift at N to D or down coast from 5 to 4 then follow service. Install parts kit.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
VOLVO S602011, 2012, 2013, 2014, 2015, 2016
VOLVO S60CC2016 (the catalog's model; the bulletin names a series or trim of it)
VOLVO S60I2016 (the catalog's model; the bulletin names a series or trim of it)
VOLVO S802011, 2012, 2013, 2014, 2015, 2016
VOLVO V602015, 2016
VOLVO V60CC2015, 2016
VOLVO XC602011, 2012, 2013, 2014, 2015, 2016
VOLVO XC902013, 2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
12V3170002012-07-06. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
20122022012-07-05. Powertrain

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TJ36665302023-10-16. Service bulletin. ERAD (Electric Rear Axle Drive) Bearing Noise
TJ29078.14.0-2012019-11-18. Service bulletin. This is a Technical Journal: Rough shifts, 5-4, Neutral Control, N-D TF80SC/SD Due to internal tolerance deviation in automatic gearbox, (TF80SC/SD) the customer may experience rough shift from 5:th to 4:th gear, or/and shift shock after standing still at brake release, or/and harsh engagement N-D shift. DTC TCM-P089500 might not be stored even with above stated symptoms. PRODUCT MODIFICATION: A modified TCM software with better adaptation functionality for internal tolerance deviation in automatic gearbox. Material for analysis can be requested in Vehicle Report.
TJ33524-1-0-20182019-04-01. Service bulletin. This is a Technical Journal: Unusual noise while driving from sealing ring. check first if the sealing ring is displaced, if so, proceed with replacement of the sealing ring
TJ339012018-11-19. Service bulletin. This is a Technical Journal: In cases that the customer may experience hard or jerky shifts when shifting from gear position N-D, please follow advice under service.
TJ321692018-11-19. Service bulletin. This is a Technical Journal: rough shift at N to D or down coast from 5 to 4 then follow service. Install parts kit.
TJ324692018-11-05. Service bulletin. This is a Technical Journal: Gear shift lever inoperable
TJ321692018-11-05. Service bulletin. This is a Technical Journal: rough shift at N to D or down coast from 5 to 4 then follow service. Install parts kit.
TJ321692018-10-29. Service bulletin. This is a Technical Journal: rough shift at N to D or down coast from 5 to 4 then follow service. Install parts kit.
PB26-0332017-10-27. Service bulletin. Parts Return 976045 O-Ring. O-Ring part number 976045 has been replaced by O-Ring part number 30622784
TJ291312017-01-13. Service bulletin. THIS IS A TECHNICAL JOURNAL: CUSTOMER MAY EXPERIENCE A LOW OIL LEVEL WARNING IN DIM AND /OR OIL LEAKAGE FROM THE ENGINE. THE OIL MAY LEAK DUE TO A CRACK IN THE PLUG FROM THE VVT PULLEY REPLACE BOTH PLUGS IN BOTH VVT-PULLEYS ACCORDING TO THE ATTACHED INSTRUCTION. PLUG PN:31375877 IF THE TIMING BELT IS EFFECTED WITH OIL , REPLACE THE TIMING BELT ACCORDING TO VIDA INSTRUCTIONS.