# Service bulletin SSM 48127

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10164500
- Published by NHTSA: 2019\-09\-06
- Manufacturer's number: SSM 48127
- Manufacturer's date: 2019\-08\-09
- NHTSA component: SUSPENSION

## NHTSA's summary

2019 F\-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing of the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual \(WSM\), Section 204\-01 and 204\-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z\-18B082\-A, Left Front KL3Z\-18B082\-B, Right Rear KL3Z\-18B084\-A, Left Rear KL3Z\-18B084\-B.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10164500-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10164500-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension

## Vehicles listed

- 2019 FORD F\-150

## Other bulletins for the same vehicles and component

- [SSM 48658](/bulletins/10172991.md), 2020-04-02, Service bulletin: SUSPENSION. SSM 48658 \- 2019\-2020 F\-150 Raptor \- Shock Absorber Solenoid Serviceable Separately From Shock Absorber 2019\-2020 F\-150 Raptor vehicles that require service of the shock absorber solenoid or wiring can be repaired with replacement of the solenoid separately from the shock absorber. The solenoid can be serviced without removing the shock from the vehicle. Refer to step 1 of the shock absorber installation procedure in the Workshop Manual \(WSM\), Section 204\-01 and 204\-02 for detailed solenoid installation information. Part Numbers: Right Front KL3Z\-18B082\-C, Left Front KL3Z\-18B082\-D, Right Rear KL3Z\-18B084\-C, Left Rear KL3Z\-18B084\-D.
- [SSM 48630](/bulletins/10172986.md), 2020-04-02, Service bulletin: SUSPENSION. SSM 48630 \- 2019\-2020 F\-150/Expedition/Navigator \- Updated Diagnostic Procedure For The Intergrated Wheel End \(IWE\) System Some 2019\-2020 F\-150/Expedition/Navigator four wheel drive vehicles may exhibit a grinding/clicking/ratcheting noise from front axle area in 2H mode under acceleration or heavy loads. The WSM diagnostic routine for the IWE vacuum system has been updated with new leak specifications and a more efficient diagnostic process. Refer to Workshop Manual \(WSM\), Section 308\-07A \> Symptom Chart \- NVH for the symptom Grinding/clicking/ratcheting noise from front axle in 2H mode under acceleration or heavy loads.

JSON: [/v1/bulletins/10164500](/v1/bulletins/10164500)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM%2048127&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10164500&vehicle=Service%20bulletin%20SSM%2048127)