# Service bulletin A9619422055256\_1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10164233
- Published by NHTSA: 2019\-09\-09
- Manufacturer's number: A9619422055256\_1
- Manufacturer's date: 2019\-08\-14
- NHTSA component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

This bulletin contains a software update for when the wrong way traffic sign appears in the instrument cluster for the incorrect cars.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10164233-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10164233-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Instrument cluster

## Vehicles listed

- 2017 to 2019 AUDI A4 ALLROAD
- 2018 to 2019 AUDI A5
- 2018 to 2019 AUDI Q5
- 2017 to 2019 AUDI Q7

## Recalls for the same vehicles and component

- [19V473000](/recalls/nhtsa/19V473000.md), 2019-06-19: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## Other bulletins for the same vehicles and component

- [A9424802055123\_5](/bulletins/10254069.md), 2024-05-07, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides information when the rear lighting warning is displayed in the instrument cluster; various DTCs are stored in the comfort system control module.
- [A4024722067804\_3](/bulletins/10249215.md), 2024-02-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides information when DTC C129700 is logged in address 00D4 and/or 00D5 for active roll stabilization.
- [A9023642072514\_1](/bulletins/10248168.md), 2024-01-04, Service bulletin: UNKNOWN OR OTHER; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT. This bulletin provides information when the speedometer needle flickers in the Audi virtual cockpit while driving.
- [A9023562032113\_8](/bulletins/10246152.md), 2023-12-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides general information about the outside air temperature reading.
- [A9023362071329\_1](/bulletins/10241234.md), 2023-09-01, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This Pending Service Solution requests that technicians create a PSS record in instances where the Audi Virtual Cockpit speedometer needle flickers while driving.
- [A9023322059335\_4](/bulletins/10240154.md), 2023-08-04, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides information for when there is noise from the area around the instrument cluster.
- [A9123032070046\_2](/bulletins/10238187.md), 2023-07-10, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; ELECTRICAL SYSTEM. This bulletin provides information for when the emergency call warning appears in the instrument cluster when leaving an area of cellular coverage.
- [A4323742059665\_5](/bulletins/10236617.md), 2023-06-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides an SVM update for when the warning light for the suspension appears in the instrument cluster, and the SVM registers an unknown event when carrying out "Check control unit configuration" and cannot be automatically parameterized.
- [A4323732051336\_7](/bulletins/10236615.md), 2023-06-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin advises that if the warning lamp for the damper control in the instrument cluster is on, and DTC B200FF0 is stored to delete the DTC and perform suspension basic settings.
- [A4323722067531\_2](/bulletins/10236613.md), 2023-06-06, Service bulletin: SUSPENSION; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0, B200FF1, B200FF3, B200FF4, B200FF5.

JSON: [/v1/bulletins/10164233](/v1/bulletins/10164233)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20A9619422055256_1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10164233&vehicle=Service%20bulletin%20A9619422055256_1)