# Service bulletin 23\-017\-19

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10162566
- Published by NHTSA: 2019\-07\-15
- Manufacturer's number: 23\-017\-19
- Manufacturer's date: 2019\-05\-23
- NHTSA component: SEATS

## NHTSA's summary

Rear Seat Back Squeak This bulletin involves lubricating the plastic overmold area on both rear seat latches. Customers may experience the following:While driving a squeak can be heard coming from one or both rear seat latches.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10162566-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10162566-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Seats

## Vehicles listed

- 2020 JEEP GLADIATOR

## Recalls for the same vehicles and component

- [2020456](/recalls/tc/2020456.md), 2020-09-25: Seats And Restraints

## Other bulletins for the same vehicles and component

- [S2023000036](/bulletins/10229290.md), 2023-01-09, Service bulletin: SEATS. Front Seat Lift Handle Binding
- [1804822](/bulletins/10229124.md), 2023-01-09, Service bulletin: AIR BAGS; ELECTRICAL SYSTEM; FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING; SEATS. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0300 \- Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within thisbulletin the right intake camshaft MUST be replaced along with this software update \(only if DTC P0300 is present\). Refer to the detailedservice procedures available in DealerConnect\>Service Library under: Service Info\>09 \- Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation\>Right. If just the software flash was done without the right intake camshaft being replacedthe DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, performjust the software update. P0441 \- EVAP Purge System Performance. P258B \- Electronic Vacuum Pump Performance. C1252\-92 \- Vacuum Pump Control Circuit \- Performance Or Incorrect Operation. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. P1404 \- EGR Close Position Performance. P1206 \- Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A \- Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: The Anti\-Lock Brake System \(ABS\) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed\(MTX Only\). Cluster displays "Autopark Engaged" even when autopark is no longer active.
- [1804822](/bulletins/10223162.md), 2022-10-17, Service bulletin: AIR BAGS; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; SEATS; EXTERIOR LIGHTING. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0300 \- Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within thisbulletin the right intake camshaft MUST be replaced along with this software update \(only if DTC P0300 is present\). Refer to the detailedservice procedures available in DealerConnect\>Service Library under: Service Info\>09 \- Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation\>Right. If just the software flash was done without the right intake camshaft being replacedthe DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, performjust the software update. P0441 \- EVAP Purge System Performance. P258B \- Electronic Vacuum Pump Performance. C1252\-92 \- Vacuum Pump Control Circuit \- Performance Or Incorrect Operation. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. P1404 \- EGR Close Position Performance. P1206 \- Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A \- Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: The Anti\-Lock Brake System \(ABS\) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed\(MTX Only\). Cluster displays "Autopark Engaged" even when autopark is no longer active.
- [S2023000036](/bulletins/10221720.md), 2022-09-26, Service bulletin: SEATS. Front Seat Lift Handle Binding
- [2302021](/bulletins/10221323.md), 2022-09-26, Service bulletin: SEATS. Front Passenger Outer Seat Bolster Foam is Collapsed This bulletin includes repositioning the passenger outer seat bolster and installing a strap and push pin to help prevent this concern from happening again. Customers may comment on the following: The front passenger outer seat bolster cushion is missing
- [9004175](/bulletins/10220008.md), 2022-09-15, Service bulletin: PARKING BRAKE; VEHICLE SPEED CONTROL; TRAILER HITCHES; SEATS. LATCH, Folding Top For a concern of a loose latch in the closed position, it is not necessary to replace the latch unless broken. Refer to instructions in service library. The position of the receiver attached to the vehicle header can be adjusted to change the ammount of force required to latch.
- [2302021](/bulletins/10212510.md), 2022-05-31, Service bulletin: SEATS; EQUIPMENT. Front Passenger Outer Seat Bolster Foam is Collapsed This bulletin includes repositioning the passenger outer seat bolster and installing a strap and push pin to help prevent this concern from happening again. Customers may comment on the following: The front passenger outer seat bolster cushion is missing
- [1804822](/bulletins/10212383.md), 2022-05-31, Service bulletin: FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; SEATS; ENGINE. Flash: Powertrain Control Module \(PCM\) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0300 \- Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within this bulletin the right intake camshaft MUST be replaced along with this software update \(only if DTC P0300 is present\). Refer to the detailedservice procedures available in DealerConnect\>Service Library under: Service Info\>09 \- Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation\>Right. If just the software flash was done without the right intake camshaft being replacedthe DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, performjust the software update. P0441 \- EVAP Purge System Performance. P258B \- Electronic Vacuum Pump Performance. C1252\-92 \- Vacuum Pump Control Circuit \- Performance Or Incorrect Operation. P0456 \- EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test \(SLVT\) to determine if a leak is present in the system. P1404 \- EGR Close Position Performance. P1206 \- Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A \- Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: The Anti\-Lock Brake System \(ABS\) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed\(MTX Only\). Cluster displays "Autopark Engaged" even when autopark is no longer active.
- [9004285](/bulletins/10181503.md), 2020-10-26, Service bulletin: SEATS; EQUIPMENT. Rear Seat Structure and Seat Kit Part Numbers For concern of folding seat back compartment cover will not lock. Please contact FCA Redacted Content prior to repair. If no response within 15 minutes, proceed with repair.
- [S2023000036](/bulletins/10178647.md), 2020-08-24, Service bulletin: SEATS; EQUIPMENT. Front Seat Lift Handle Binding

JSON: [/v1/bulletins/10162566](/v1/bulletins/10162566)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2023-017-19&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10162566&vehicle=Service%20bulletin%2023-017-19)