# Service bulletin 19\-FL\-003HG

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10160099
- Published by NHTSA: 2019\-05\-20
- Manufacturer's number: 19\-FL\-003HG
- Manufacturer's date: 2019\-04\-15
- NHTSA component: ELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

This bulletin provides the procedure to write the Vehicle Identification Number \(VIN\) during the replacement of the Engine Control Module \(ECM\) or Powertrain Control Module \(PCM\). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10160099-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10160099-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Transmission and driveline, Automatic transmission

## Vehicles listed

- 2017 to 2018 GENESIS G80
- 2017 to 2018 GENESIS G90

## Other bulletins for the same vehicles and component

- [21\-AT\-010HG](/bulletins/10253037.md), 2024-04-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This TSB provides a procedure to replace the solenoids listed below for slipping, shift flare and/or harsh shift during the 2\~3, 3\~4 or 4\~5 upshift.
- [19\-AT\-023HG](/bulletins/10253027.md), 2024-04-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700\~2900 rpm \(See shop manual for stall speed\). FAIL: Engine revs to redline limit \(6,000\~6,500 rpm\). If so, replace the transmission.
- [19\-AT\-011HG](/bulletins/10161686.md), 2019-07-01, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. The procedure describes the procedure to check the ATF level for 8\-speed Rear\-Wheel\-Drive vehicles.
- [19\-AT\-007HG](/bulletins/10160096.md), 2019-05-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality.
- [19\-AT\-001HG](/bulletins/10154684.md), 2019-03-18, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E\-module.
- [5NP\-H3D9Z\-03](/bulletins/10110919.md), 2017-08-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES. The following vehicles are equipped with an 8\-speed automatic transmission. The ATF level can be checked by the procedure shown below.
- [5NP\-D2Y6N\-12](/bulletins/10089623.md), 2017-01-26, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. "UPDATE THE WARRANTY INFORMATION. DESCRIPTION: DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED BELOW. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E\-MODULE."
- [5NP\-W7J6Y\-11](/bulletins/10089604.md), 2017-01-26, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. "AUTOMATIC TRANSMISSION SOLENOID \& SENSOR REPLACEMENT FOR DTC P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P2709 \& P0841"
- [5NP\-J4N8R\-01](/bulletins/10089506.md), 2017-01-25, Service bulletin: VEHICLE SPEED CONTROL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN:AUTOMATIC TRANSMISSION. DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E\-MODULE.
- [5NP\-Q9X6P\-10](/bulletins/10082461.md), 2016-10-14, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. THIS BULLETIN PROVIDES A PROCEDURE TO TRANSFER PRESSURE DATA TO THE TCM USING GDS MOBILE. THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY.

JSON: [/v1/bulletins/10160099](/v1/bulletins/10160099)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2019-FL-003HG&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10160099&vehicle=Service%20bulletin%2019-FL-003HG)