Service bulletin TSB-19-52A-002
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10159638 |
| Published by NHTSA | 2019-05-13 |
| Manufacturer's number | TSB-19-52A-002 |
| Manufacturer's date | 2019-04-11 |
| NHTSA component | STRUCTURE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL |
NHTSA's summary
This is a Technical Service Bulletin sent to dealers. This bulletin updates the Interior and the Supplemental Restrain System (SRS) sections of the affected Service Manuals, to update the retention tether of the a-pillar and to include a new part. This bulletin supersedes TSB-14-52A-003, issued July, 2014, to include additional information on the front pillar trim installation service points.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Equipment and accessories, Labels and manuals
| MITSUBISHI OUTLANDER SPORT | 2011, 2012, 2013, 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 21V144000 | 2021-03-05. STRUCTURE:FRAME AND MEMBERS; SUSPENSION:FRONT:CONTROL ARM:LOWER ARM |
|---|---|
| 20V279000 | 2020-05-18. STRUCTURE:FRAME AND MEMBERS; SUSPENSION:FRONT:CONTROL ARM:LOWER ARM |
| 16V867000 | 2016-12-02. STRUCTURE:BODY:HATCHBACK/LIFTGATE:HINGE AND ATTACHMENTS; STRUCTURE:BODY:HATCHBACK/LIFTGATE |
| 15V579000 | 2015-09-21. EQUIPMENT:OTHER:LABELS |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| TECH TALK 281 | 2024-09-07. Other. Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications. |
|---|---|
| DEALER LETTER | 2023-08-04. Service bulletin. This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 3rd quarterly technician quiz for 2023. |
| TSB-23-00-004 | 2023-05-04. Service bulletin. This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap-film adhesive residue. |
| TSB-23-00-001 | 2023-05-04. Service bulletin. This Technical Service Bulletin reviews the regulations that require a label showing the reduction in load carrying capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs. |
| DEALER LETTER | 2023-05-04. Service bulletin. This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 2nd quarterly technician quiz for 2023. |
| TSB-23-33-001 | 2023-02-07. Service bulletin. This TSB provides corrections and additional information for the Front and Rear Suspension inspection procedures. (Service Manual Revision) |
| TSB-22-52A-001RE | 2022-02-08. Service bulletin. This Technical Service Bulletin instructs dealers to apply Nonwoven Fabric Tape between the Seat Back and Urethane Pad when customers report a condition where an abnormal rubbing noise is heard from the Seat Back when a driver and/or passenger is seated in the front seat(s). |
| TIN1552B001 | 2021-05-24. Service bulletin. Driver's Seat Slide Sensor Wiring Harness Damage Under Driver's Seat - MMNA has slide sensor malfunction" with OCM DTC B1B8C "Driver's Seat slide sensor open circuit " Additional OCM DTC that may also be present are: B1B8C "Drive's seat slide sensor curcuit Performance, "and B1B8E "Driver's seat slide sensor short circuit" |
| TIN-21-SR-001 | 2021-04-08. Service bulletin. This Technical Information Notice was sent to dealers informing them Safety Recall Bulletin SR-21-001 was released and is an expansion of Recall SR-20-003. |
| TSB-21-51-001 | 2021-02-06. Service bulletin. This is a Technical Service Bulletin sent to dealers instructing them to replace both sides of the wheel arch molding when customers report a condition in vehicles equipped with a front wheel arch molding displays a gap between the front wheel arch molding and the fender. |