Service bulletin SSM 47830
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10155576 |
| Published by NHTSA | 2019-04-01 |
| Manufacturer's number | SSM 47830 |
| Manufacturer's date | 2019-02-26 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
Some 5.0L 4V engines may exhibit a tick/tap/rattle or knock immediately after secondary timing chain tensioner installation. In some cases the secondary timing chain tensioners are not fully released during installation.To confirm, remove both valve covers and inspect the secondary timing chains and tensioners. If the chain is loose fitting and the tensioner does not appear to be extended, using your hand depress the chain/guide and tensioner several times or until the tensioner releases taking up the slack in the chain. If the chain does not have slack, follow Workshop Manual Section 303-00 to diagnose. The Workshop Manual section 303-01C has been updated to reflect the installation releasing process for the secondary timing chain tensioner.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| FORD F-150 | 2011, 2012, 2013, 2014 |
|---|---|
| FORD MUSTANG | 2011, 2012, 2013, 2014 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SSM 52334 | 2024-03-20. Service bulletin. Some 2011-2024 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a tick tap and/or typewriter ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150°F (65°C) or higher and engine speed is at idle up to approximately 1700 RPM. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise tick rate can be faster or slower and is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. This information along with an example audio clip has been added to the WSM Section 303-00 Engine System General Information > Diagnosis and Testing > Engine > PPT F > Step F2. |
|---|---|
| TSB160001 | 2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C |
| LTR3756 | 2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - January 2016 |
| SSM 49761 | 2021-05-03. Service bulletin. Some 2011-2021 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65Å’C) or higher and engine speed is at idle up to approximately 1700 RPMs. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. |
| RFI20210205_667- | 2021-03-15. Service bulletin. This SKU is a Turbocharger. The customer communication requested return of unsold inventory to inspect the sealing plugs. If the plug isn't sealing properly it may lead to a oil leak. If the oil leak persists it can lead to the oil check light coming on. |
| RFI20210205_667- | 2021-03-15. Service bulletin. This SKU is a Turbocharger. The customer communication requested return of unsold inventory to inspect the sealing plugs. If the plug isn't sealing properly it may lead to a oil leak. If the oil leak persists it can lead to the oil check light coming on. |
| 16-0074 | 2020-12-07. Service bulletin. Some 2011-2014 Mustang vehicles equipped with a 3.7L engine may exhibit coolant pump leakage due to air entering the system. |
| DOR-N3Z7B-03 | 2020-03-30. Service bulletin. This SKU is an Oil Dipstick. The customer communication requested return of unsold inventory to inspect the dipstick tube. The dipstick tube inner diameter may be small enough that it prevents installation of the OE dipstick. |
| SSM 47948 | 2019-05-07. Service bulletin. SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter. |
| SSM 47830 | 2019-04-08. Service bulletin. Some 5.0L 4V engines may exhibit a tick/tap/rattle or knock immediately after secondary timing chain tensioner installation. In some cases the secondary timing chain tensioners are not fully released during installation.To confirm, remove both valve covers and inspect the secondary timing chains and tensioners. If the chain is loose fitting and the tensioner does not appear to be extended, using your hand depress the chain/guide and tensioner several times or until the tensioner releases taking up the slack in the chain. If the chain does not have slack, follow Workshop Manual Section 303-00 to diagnose. The Workshop Manual section 303-01C has been updated to reflect the installation releasing process for the secondary timing chain tensioner. |