# Service bulletin B320119

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10153749
- Published by NHTSA: 2019\-02\-25
- Manufacturer's number: B320119
- Manufacturer's date: 2019\-01\-01
- NHTSA component: STEERING

## NHTSA's summary

SERVICE ACTION: MECHANICAL STEERING COLUMN. The steering column adjustment gears may not have been aligned correctly Fault in the production of the steering column.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2019/MC-10153749-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2019/MC-10153749-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Steering

## Vehicles listed

- 2016 to 2017 BMW X1
- 2016 to 2017 BMW X1 SAV
- 2018 BMW X2

## Recalls for the same vehicles and component

- [15V887000](/recalls/nhtsa/15V887000.md), 2015-12-30: STEERING:GEAR BOX \(OTHER THAN RACK AND PINION\)

## Other bulletins for the same vehicles and component

- [B612123](/bulletins/10245376.md), 2023-12-06, Service bulletin: STEERING. The steering wheel heating takes a long time to achieve the desired temperature.
- [SIB330122](/bulletins/10215752.md), 2022-07-18, Service bulletin: STEERING; EQUIPMENT. The following complaints may be noticed while slow maneuvering with a steering input of 80\-100% \(at or near full lock, e.g., parking lot maneuvers\) or accelerating with a medium to large steering angle: Humming or creaking noises from the rear area, slight vibrations also noticeable from the driver's seat. The vehicle may also jerk slightly.
- [B610920](/bulletins/10174023.md), 2020-04-20, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); ELECTRICAL SYSTEM; STEERING; SUSPENSION. CHECK CONTROL MESSAGES FOR BRAKE SUSPENSION AND AIR BAG SYSTEM MALFUNCTION: Multiple check control messages \(CCM\) can display for brake suspension and air bag system malfunction. The customer may also complain about any of the following: Engine can no longer be switched off Drive position \(D\) cannot be engaged on the gear selector switch \(GWS\) Reduction of steering assist After an engine emergency shut\-off \(either a prolonged long press; or 3 consecutive short presses of the Start/Stop button\) and the vehicle going to sleep \(identifiable by the lighting of the "Start/Stop button"\) everything resumes normal functionality and the CCM messages no longer appear.
- [B320214](/bulletins/10171488.md), 2020-02-18, Service bulletin: ELECTRICAL SYSTEM; STEERING. Power\-assisted Steering Intermittently Not Available at Engine Start\-up: This Service Information Bulletin \(Revision 1\) replaces SI B32 02 14 dated November 2016. The power\-assisted steering is unavailable at start up/drive readiness. No communication with the Electric Power Steering \(EPS\). Possible fault codes: Fault code Text D356A5 message fault \(display of the check control driving dynamics 02 D: Disp\_CC\_DRDY\_02\) Timeout D359BF message fault \(actual steering torque of the driver actuator ID: AVL\_STMOM\_DV\_ACT\) Timeout D356B6 message fault \(display of the check control driving dynamics 02 ID: DISP\_CC\_DRDY\_02\) \- Alive 480AB8 internal status management of the complete monitoring range CDA451 FlexRay message \(actual steering torque of the driver actuator 49.0.2\): missing CDA452 FlexRay message \(actual force of the rack 49.0.2\): missing D35B26 message fault \(actual position of the EPS ID: AVL\_PO\_EPS\) \- Timeout D355C4 message fault \(status of the electrical steering front axle ID: ST\_EST\) \- Timeout 48083B Peripheral/functional error on the engine control unit interface Actual steering angle of the front axle; signal temporarily invalid D35COC message fault \(actual force of the rack ID: AVL\_FORC\_GRD\) \- Timeout. Electric Power Steering \(EPS\).
- [B663219](/bulletins/10168015.md), 2019-11-18, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; STEERING. LDW \(LANE DEPARTURE WARNING\): STEERING WHEEL VIBRATION NOT WORKING. LDW steering wheel vibration is not working. Software in the Body Domain Controller \(BDC\) control unit.
- [B510516](/bulletins/10151102.md), 2018-12-10, Service bulletin: STEERING; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. SUBJECT Steering Column Upper Joint Cover Trim Shows Creasing. Customer can see a crease in the upper steering column joint trim, especially when moved into the lower position. Tensioning of the upper steering column joint trim
- [B321116](/bulletins/10146955.md), 2018-11-05, Service bulletin: STEERING; ELECTRICAL SYSTEM:SOFTWARE. "EPS INTERMITTENT ASSIST FAILURE, FC 4823FA. The steering assistance fails after several, consecutive parking maneuvers or sustained hold at the end stop. EPS assistance starts functioning again after a few minutes. And, Fault code 4823FA \(""EPS control unit internally overload, reduction in steering assistance""\) is stored in the EPS control module. EPS software error \(overloading protection function over sensitivity\)."
- [B320214](/bulletins/10146954.md), 2018-11-05, Service bulletin: STEERING:ELECTRIC POWER ASSIST SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM. POWER\-ASSISTED STEERING INTERMITTENTLY NOT AVAILABLE AT ENGINE START\-UP This Service Information bulletin supersedes SI 32 02 14 dated August 2014. The power assisted steering is unavailable at start up/drive readiness. No communication with the Electric Power Steering \(EPS\). Possible fault codes: D356A5 \- message fault \(display of the check control driving dynamics 02, D: Disp\_CC\_DRDY\_02\) \-Timeout D359BF \- message fault \(actual steering torque of the driver actuator, ID: AVL\_STMOM\_DV\_ACT\) \-Timeout D356B6 \- message fault \(display of the check control driving dynamics 02, ID: DISP\_CC\_DRDY\_02\) \- Alive 480AB8 \- internal status management of the complete monitoring range CDA451\- FlexRay, message \(actual steering torque of the driver actuator, 49.0.2\): missing CDA452\- FlexRay, message \(actual force of the rack, 49.0.2\): missing D35B26 \- message fault \(actual position of the EPS, ID: AVL\_PO\_EPS\) \- Timeout D355C4\- message fault \(status of the electrical steering front axle, ID: ST\_EST\) \- Timeout 48083B\- Peripheral/functional error on the engine control unit interface Actual steering angle of the front axle; signal temporarily invalid D35COC\- message fault \(actual force of the rack, ID: AVL\_FORC\_GRD\) \- Timeout. Electric Power Steering \(EPS\)

JSON: [/v1/bulletins/10153749](/v1/bulletins/10153749)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20B320119&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10153749&vehicle=Service%20bulletin%20B320119)