Service bulletin T-SB-0009-15_Rev
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10153279 |
| Published by NHTSA | 2019-02-19 |
| Manufacturer's number | T-SB-0009-15_Rev |
| Manufacturer's date | 2019-01-14 |
| NHTSA component | WHEELS |
NHTSA's summary
TSB: REVISION NOTICE January 14, 2019 Rev2: Applicability has been updated to include 2018 model year 4Runner vehicles. September 19, 2017 Rev1: Applicability has been updated to include 2016 - 2017 model year 4Runner vehicles. Any previous printed versions of this bulletin should be discarded. Some 2015 - 2018 model year TRD Pro edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Wheels
| TOYOTA 4RUNNER | 2015, 2016, 2017, 2018 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TSB007019 | 2023-12-26. Service bulletin. TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition. |
|---|---|
| T-SB-0070-19 Rev | 2023-11-27. Service bulletin. TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition. |
| Toyota PRO19-02 | 2022-02-14. Service bulletin. POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well. |
| SET-TSB-17-004 | 2020-11-23. Service bulletin. SET ACCESSORY WHEEL BUMPER/FENDER INTERFERENCE |
| T-SB-0042-16 | 2018-06-11. Service bulletin. TSB: Tire Positioning Before New Vehicle Delivery During the manufacturing process, tires are nounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the direction of rotation. |
| SET-TSB-18-002 | 2018-04-16. Service bulletin. Discusses best practices and proper equipment operation when addressing tire balance concerns on 4Runner models equipped with Southeast Toyota accessory tire and wheel packages. |
| T-TT-0424-16 | 2018-04-02. Service bulletin. TT: Front Brake Vibration Key Points: * Issue can occur at any time if improper torque is applied on lug nuts * Over time, even one lug nut over or under torqued, can cause a vibration issue * When lug nuts are over torqued, this causes the rotor to have a runout out condition which can lead to brake vibration concerns * Brake vibration issues can occur at parking lot to highway speeds * Brake vibration issues can occur at light to moderate braking * Tightening lug nuts in a star pattern method during the torqueing process will assure that even/equal pressure is applied across the rotor hub surface * Torque sticks/wrenches should be used to apply accurate torque values when tightening * Do Not use impact guns/ratchets to completely run lug nuts up to the wheel surface |
| T-SB-0026-14 | 2018-04-02. Service bulletin. During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. |
| T-SB-0026-14 Rev | 2017-08-14. Service bulletin. TSB: During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Please refer to the following procedure to ensure that the original tires stay in the same location on the vehicle. |
| T-SB-0009-15 | 2017-08-14. Service bulletin. TSB: Some 2015 model year TRD Pro Edition 4Runner vehicles may experience an abnormal noise when in reverse with the wheels at or near full lock due to interference between the tire and bumper, and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition. |