WenmarOpen by Wenmar Pro

Service bulletin PC669 2019 Altim

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10152530
Published by NHTSA2019-01-07
Manufacturer's numberPC669 2019 Altim
Manufacturer's date2018-11-21
NHTSA componentEQUIPMENT; FUEL SYSTEM, GASOLINE

NHTSA's summary

Fuel Feeder Tube Clip Dealer Inventory *****Dealer Announcement***** Nissan is issuing a quality hold to require dealers to inspect the Fuel Feeder Tube Clip position and confirm it is in the lock position on ~15,800 specific 2019 Altima vehicles identified in Service Comm. The clips may not be fully locked into place. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers must complete this inspection and if necessary, repair, prior to sale. The inspection and if necessary, repair; will take less than 15 minutes per vehicle to complete and no parts are required. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History ? Open Campaigns I.D. PC669 - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Dealers should inspect the Fuel Feeder Tube Clip position to confirm it is in the locked position. 3. Use the attached procedure to inspect any vehicles affected by this quality action: - If inspection result is ?OK?, dealers may submit a warranty claim using Op Code PC6690 and release the vehicle. - If the inspection result is ?NG? (clip is not fully locked into place) - Take a photograph of the clip position and email it to: nnafqasupport@nissan-usa.com along with the following: - E-mail subject line: PC669 (Altima Fuel Feeder Tube Clip) - Attach Clear Pictures of the clip that is not locked into place. - Dealer Name: - Dealer Code: - Dealer Address:

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories, Fuel system

Vehicles listed
NISSAN ALTIMA2019

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V3160002019-04-18. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
18V9220002018-12-20. FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP; FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
NTB23-018G2024-03-08. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin is no longer active. To access infotainment software updates via the Infotainment Software Update Utility: Select SPECIALTY TOOLS, and then select Infotainment Software Updates on the left side of ASIST. Please discard previous versions of NTB23-018.
NTB23-018F2024-02-08. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin is no longer active. To access infotainment software updates via the Infotainment Software Update Utility: Select SPECIALTY TOOLS, and then select Infotainment Software Updates on the left side of ASIST. HINT: Initially, the Infotainment Software Update Utility will be available only on the CONSULT PC version of ASIST. The Utility will be added to ASIST WEB at a later date. Please discard previous versions of NTB23-018.
NTB20-080D2024-02-08. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY below. Please discard previous versions of this bulletin.
NTB23-018E2023-09-09. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-018D2023-09-09. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-018C2023-05-06. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-080C2023-05-06. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY below. Please discard previous versions of this bulletin.
NTB23-018B2023-04-10. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-018A2023-04-10. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-0182023-04-10. Service bulletin. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES SERVICE INFORMATION When diagnosing an infotainment issue or after replacement of the AV Control Unit, it is necessary to verify the current software version of the AV Control Unit to determine if a software version update is required. Use the vehicle tables in this bulletin to determine the current software version, if the AV Control Unit requires a software version update, and which procedure to use to update the AV Control Unit. The software updates in this bulletin are to address stability improvements and “bug” fixes. IMPORTANT: If the customer is experiencing a software related concern, refer to NTB21-038 to verify if the customer concern is a hardware or software related issue. If the concern is a software related issue, review the information in this bulletin to update the AV Control Unit as needed.