# Service bulletin M660216

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10151348
- Published by NHTSA: 2018\-12\-10
- Manufacturer's number: M660216
- Manufacturer's date: 2016\-05\-01
- NHTSA component: FORWARD COLLISION AVOIDANCE

## NHTSA's summary

Collision warning and Pedestrian Warning Failed. While driving, a Check Control Message \(CCM\) is displayed advising of the following: Front collision warning failed Pedestrian detection failed The following fault code is stored in the KAFAS \(Camera\-based Driver Assistance System\): 0X800AC4 \- Camera calibration failed CAUSE The KAFAS camera is not properly mounted and secured to the mounting bracket on the windshield, And/ or The mounting bracket glued to the windshield is not installed correctly. The pictures below show both incorrect and correct installation. KAFAS camera mounting bracket not secured correctly to the windshield. Notice the spacing between the white outline and the bracket. Possible solutions: Verify the KAFAS camera is installed \(seated\) properly in its bracket Replace the KAFAS camera Replace the windshield

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10151348-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10151348-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Vehicles listed

- 2017 MINI CLUBMAN
- 2014 to 2015 MINI COOPER
- 2017 to 2019 MINI COOPER
- 2016 MINI COOPER CONVERTIBLE
- 2014 to 2017 MINI COOPER S
- 2019 MINI COOPER S

## Other bulletins for the same vehicles and component

- [M340120](/bulletins/10181236.md), 2020-10-19, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); STRUCTURE. SERVICE ACTION \- PROGRAM THE BODY DOMAIN CONTROL \(BDC\) UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control \(DSC\) unit via the On Board Diagnostic \(OBD\) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
- [M120418](/bulletins/10136003.md), 2018-05-07, Service bulletin: BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. NOISE COMING FROM OIL FILTER AREA AFTER A COLD START: repeating fizzing noise may be heard from the engine oil filter area after a cold start.
- [M120318](/bulletins/10136002.md), 2018-05-07, Service bulletin: BACK OVER PREVENTION; ENGINE AND ENGINE COOLING. BUZZING NOISE FROM VALVETRONIC MOTOR BEFORE OR AFTER ENGINE OPERATION: Buzzing noise may be heard from the Valvetronic motor when the vehicle is unlocked, before the engine is started, or after engine is turned off.

JSON: [/v1/bulletins/10151348](/v1/bulletins/10151348)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20M660216&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10151348&vehicle=Service%20bulletin%20M660216)