WenmarOpen by Wenmar Pro

Service bulletin 23-022-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10150607
Published by NHTSA2018-12-10
Manufacturer's number23-022-15
Manufacturer's date2015-06-04
NHTSA componentEQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:BODY:DOOR

NHTSA's summary

Door Glass Run Seal Weatherstrip Separated At Corner This bulletin involves inspecting and if necessary, replacing the door glass run seal. The customer may describe what appears to be a tear or cut in the corner of the glass run seal. Glass run seal may separate at bonded corners due to insufficient seal bond strength as shown in (Fig. 1). Fig. 1 Door Glass Run Seal Seam Separation 1 - Seam Separation This bulletin applies ONLY to the area identified in (Fig. 2) on left side of the vehicle. ? (WK) Jeep Grand Cherokee: Left rear door C-pillar corner. ? (WD) Dodge Durango: front door B-pillar corner. Fig. 2 Door Glass Run Seal Inspection Area 1 - (WK) Jeep Grand Cherokee 2 - (WD) Dodge Durango

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame, Equipment and accessories

Vehicles listed
DODGE DURANGO2015
JEEP GRAND CHEROKEE2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
15V4610002015-07-23. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S1623000028 Rev. K2026-06-18. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S1623000028 REV.J2026-06-16. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S1623000028 REV.I2026-06-03. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
S1623000028 REV.H2026-04-10. Service bulletin. Outside Power Fold Rearview Mirror Noise Or Loose At Pivot. Mirror Contacts Door Window Glass In The Folded Position.
31-001-25 REV. A2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
31-001-242024-07-30. Service bulletin. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
983222024-05-31. Other. STEP KIT - TUBULAR SIDE
31001232024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.