WenmarOpen by Wenmar Pro

Service bulletin DOR-B8H4Z-11

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10148818
Published by NHTSA2018-11-19
Manufacturer's numberDOR-B8H4Z-11
Manufacturer's date2018-10-02
NHTSA componentSTEERING

NHTSA's summary

This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Steering

Vehicles listed
FORD E-2502009, 2010, 2011, 2012, 2013, 2014
FORD E-3502009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
FORD EXCURSION2000, 2001, 2002, 2003, 2004
FORD F-250 SD2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 (the catalog's model; the bulletin names a series or trim of it)
FORD F-350 SD1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 (the catalog's model; the bulletin names a series or trim of it)
FORD F-450 SD2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20150812015-02-24. Steering
98V1160001998-05-29. STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
19981051998-05-25. Steering

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 521882024-01-24. Service bulletin. 2024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
SSM 511042022-10-03. Service bulletin. Some 2017-2019 F-Super Duty vehicles equipped with adaptive steering may require steering wheel replacement for various reasons. The steering wheel assembly contains the steering effort control module (SECM) and steering angle sensor module (SASM). Previous software versions of the Integrated Diagnostic Software (IDS) scan tool may not have programed the SECM properly after replacement. Engineering has corrected the concern and SECM programming can now be successfully performed on these vehicles using the latest software level of IDS.
20N04-S12022-06-13. Service bulletin. Certain 2017 through 2019 Model Year F250/350 4x4 and all F450/550 Vehicles - Steering Linkage Damper Replacement. In some of the affected vehicles, customers may experience sustained steering wheel oscillation after hitting rough pavement or an expansion joint at speeds typically above 45 mph (72 Km/h).
TSB 21-21732021-06-03. Service bulletin. Some 2017-2019 F-250/F-350 4WD vehicles may exhibit a sustained steering wheel oscillation after hitting rough pavement or an expansion joint above 45 mph (72 km/h). This may be due to excessive lag/lash of the steering linkage damper. To correct the condition, follow the Service Procedure to replace the steering linkage damper.
SSM 497402021-05-03. Service bulletin. Some 2017-2021 F-Super Duty four-wheel drive (4WD) vehicles may have a customer concern of intermittently exhibiting excessive steering oscillation. To correct the condition, replace the steering damper with KC3Z-3E651-B and return the vehicle to the customer. For claiming, use causal part 3E651 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual. If the concern returns, refer to the updated procedures, with videos, in Workshop Manual (WSM), Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart.
SSM 496932021-03-31. Service bulletin. For 2017-2019 F-Super Duty vehicles equipped with adaptive steering and require steering wheel replacement, corrections for SASM and SECM module programming errors have been included in IDS level 121.03. Using IDS software level 121.03, start a NEW session and run the Programmable Module Installation (PMI) procedure. Follow the remaining procedures in Workshop Manual (WSM), Section 211-04 to complete the steering wheel installation.
SSM 496282021-03-03. Service bulletin. Some 2017-2021 F-Super Duty vehicles may intermittently exhibit excessive steering oscillation. A new instructional video has been published in the Workshop Manual (WSM) to provide specific measurement instructions on the appropriate tools and methods to determine which steering linkage joints are exceeding lash specifications and which are operating as designed. The left side tie rod end and sector shaft arm drag link joints should not be replaced without obtaining the proper lash measurements. Refer to WSM, Section 211-03 Steering Linkage > Diagnosis and Testing > Symptom Chart.
PC-01.12.20162020-09-19. Service bulletin. In monitoring our technical service inquiries and technical service bulletins from Ford, there is the potential for moderate to severe steering wheel oscillation (wobble) to occur. After extensive testing and outside feedback, the following details have been established to correct or prevent steering wheel oscillation occurrences in lifted 05-16 Ford Super Duty 4wd pickups.
SSM 488772020-07-07. Service bulletin. Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2B11, P2B13, P2B15, P2B17, P2B19, P2B1B, P2B1D and/or P2B1F. If these codes have set with a customer complaint of abnormal steering wheel oscillation, clear these DTCs and address any steering related concerns. If these DTCs do not return, do not make any fuel injector related repairs. The abnormal steering wheel oscillation event may be generating noise on the camshaft or crankshaft sensor frequency resulting in these DTCs to set.
20N042020-05-05. Service bulletin. In some of the affected vehicles, customers may experience sustained steering wheel oscillation after hitting rough pavement or an expansion joint at speeds typically above 45 mph (72 Km/h).