# Service bulletin 651614

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10148427
- Published by NHTSA: 2018\-11\-13
- Manufacturer's number: 651614
- Manufacturer's date: 2014\-11\-01
- NHTSA component: ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM:SOFTWARE

## NHTSA's summary

Central Information Display Intermittently Dimming or Flashing Off/On. Intermittently the Central Information Display \(CID\) dims and/or flashes off/on. There are two possible root causes for this issue. Cause 1: Voltage supply error from the Headunit\-high \(HU\-H\) to the Central Information Display \(CID\) when the display brightness is set to 60% or higher Cause 2: Calibration data for dimming the Central Information Display \(CID\) at high temperatures or bright sunlight is set incorrectly internally in the CID Affected Central Information Displays were manufactured from 02/01/2013 to 06/09/2014. The manufacturing date is included in the serial number printed on the parts label on the CID. IMPORTANT: The manufacturing date is written in the following way: dd mm yy Example: The manufacturing date of August 15, 2013 is printed on the label in the following way: 15 08 13

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10148427-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10148427-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Software, Wiring and fuses

## Vehicles listed

- 2014 BMW 525D XDRIVE
- 2013 to 2015 BMW 528I
- 2014 to 2015 BMW 535D
- 2013 to 2015 BMW 535I
- 2013 to 2015 BMW 550I
- 2013 to 2015 BMW 640I
- 2013 to 2015 BMW 650I
- 2013 to 2015 BMW 740I
- 2015 BMW 740LD
- 2013 to 2015 BMW 740LI
- 2013 to 2015 BMW 750I
- 2013 to 2015 BMW 750LI
- 2014 to 2015 BMW 760LI
- 2013 BMW ACTIVE HYBRID 5
- 2013 BMW ACTIVE HYBRID 7
- 2014 to 2015 BMW ACTIVE HYBRID 7
- 2013 BMW F800 R
- 2015 BMW F800 R
- 2013 to 2015 BMW M5
- 2013 to 2015 BMW M6
- 2013 BMW R 1200 GS
- 2015 BMW R NINE T
- 2014 to 2015 BMW R1200 S ADVENTURE

## Recalls for the same vehicles and component

- [24V608000](/recalls/nhtsa/24V608000.md), 2024-08-13: ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES; ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP

## Other bulletins for the same vehicles and component

- [B840221](/bulletins/10200249.md), 2021-08-09, Service bulletin: EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM:SOFTWARE. The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G \(Telematics ControlModule\) can no longer be supported by the cellular network provider starting February 2022. The decision to phase out 3G network technology was made at the discretion of the respective cellular carriers and lies beyond the control of BMW. Due to the phase\-out, BMW Assist and ConnectedDrive services will no longer be supported after this date.
- [B650709](/bulletins/10179009.md), 2020-08-31, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. NAVIGATION SYSTEM \- REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
- [B651419](/bulletins/10166390.md), 2019-10-21, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. HEAD UNIT NBT EVO \(HU\-H2\) PROGRAMMING ABORT: The CID screen may light up blue. When this occurs A battery reset is not successful in restoring head unit operation Software error in the Bootloader file \(BTLD\) of the head unit.
- [B651419](/bulletins/10163056.md), 2019-07-22, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. HEAD UNIT NBT EVO \(HU\-H2\) PROGRAMMING ABORT. During programming several aborts can occur in the head unit NBT EVO \(HU\-H2\).
- [613512](/bulletins/10162457.md), 2019-07-12, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:APPLIANCE:AIR CONDITIONER. Radio and Air Conditioning Functions Inoperative, When Vehicle is Moving. All audio and heating/air conditioning functions cannot be controlled when the vehicle is moving. After the vehicle is turned off and has entered sleep mode \(after approximately 30 minutes\), the system operates normally. CAUSE: Software error in the audio and air conditioning control panel.
- [B622017](/bulletins/10160355.md), 2019-05-20, Service bulletin: ENGINE; ELECTRICAL SYSTEM:SOFTWARE. N63T CCM "LOW OIL LEVEL" NOT DISPLAYED. Drivetrain Malfunction Warning is illuminated and DME fault code 1C4002 \(Engine oil level: too low\) is stored. Customer complains that Check Control Message \(Low Oil level"\) has never been displayed. The engine oil level measurement test works correctly and shows low oil level when checked under Vehicle Status tab in CID.
- [B610419](/bulletins/10160348.md), 2019-05-20, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ENGINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. VEHICLE DOES NOT START BATTERY TOTALLY DISCHARGED This Service Information bulletin replaces SI B61 04 19 dated March 2019.
- [B110118](/bulletins/10160329.md), 2019-05-20, Service bulletin: EQUIPMENT; ENGINE; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE. N63T \- CCM "LOW OIL LEVEL" NOT DISPLAYED. Drivetrain Malfunction Warning is illuminated and DME fault code 1C4002 \(Engine oil level: too low\) is stored. Customer complains that Check Control Message \(Low Oil level"\) has never been displayed. The engine oil level measurement test works correctly and shows low oil level when checked under Vehicle Status tab in CID. Instrument cluster software error.
- [MC6192247601](/bulletins/10151430.md), 2018-12-10, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE. Shift assist does not function after performing SIB 23 001 15 \(017\) DME software upgrade. This is due to a progrm fault in ISTA/p version 3.56.0.
- [MC62571524\_03](/bulletins/10151297.md), 2018-12-10, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. During programming ith ISTA/P software version3.58.2.001. a programming abort occurred. Afterwards the vehicle is inoperative and can no longer be started. Repeated programming is not possible with this tversion. Software bug.

JSON: [/v1/bulletins/10148427](/v1/bulletins/10148427)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20651614&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10148427&vehicle=Service%20bulletin%20651614)