# Service bulletin 2052441.1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10148082
- Published by NHTSA: 2018\-11\-13
- Manufacturer's number: 2052441.1
- Manufacturer's date: 2018\-10\-01
- NHTSA component: SERVICE BRAKES, HYDRAULIC

## NHTSA's summary

Front Brake pads with Part Number 3W0 698 151AA

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10148082-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10148082-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes

## Vehicles listed

- 2007 to 2008 BENTLEY ARNAGE T

## Other bulletins for the same vehicles and component

- [2052785.8](/bulletins/10245093.md), 2023-11-08, Service bulletin: SERVICE BRAKES, HYDRAULIC; UNKNOWN OR OTHER. Brake Noise Identification: Customer Statement: \-Noise/squeal complaint from the braking system Technical Background: \-The noise/squeal can be reproduced and clearly assigned to the braking system
- [2052785/6](/bulletins/10201949.md), 2021-10-05, Service bulletin: SERVICE BRAKES, HYDRAULIC. Brake noise identification. Customer statement / workshop findings: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical background Brake noises can be attributed to many causes. Eight of the most common causes are: \- Brake discs or pads are close to their wear limit. \- New brake pads and/or discs have not been properly bedded in after installation. \- Aftermarket pads or discs are installed. \- There is debris such as small stones, grit, road salt or sand between the brake disc and pad. \- Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time \(Figure 1\).
- [2052785/5](/bulletins/10179439.md), 2020-09-05, Service bulletin: SERVICE BRAKES, HYDRAULIC. Brake noise identification. Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background: Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time \(Figure 1\).
- [2052785/4](/bulletins/10169918.md), 2020-01-09, Service bulletin: SERVICE BRAKES, HYDRAULIC. Condition: Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time \(Figure 1\). 6. Discs have a groove in them \(Figure 2\) 7. There is chemical contamination on the braking surface of the disc due to a wheel or tyre cleaner being sprayed directly onto the disc \(Figure 3\). 8. There are pad marks on the brake disc as a result of the brake pad material transferring to the discs. This can occur when a vehicle has been stood for long periods of time in a wet or snowy environment \(Figure 4\).
- [2052785.3](/bulletins/10161858.md), 2019-07-01, Service bulletin: SERVICE BRAKES. Brake noise identification

JSON: [/v1/bulletins/10148082](/v1/bulletins/10148082)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202052441.1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10148082&vehicle=Service%20bulletin%202052441.1)