WenmarOpen by Wenmar Pro

Service bulletin 5NP-D3P4H-10

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10145503
Published by NHTSA2018-10-15
Manufacturer's number5NP-D3P4H-10
Manufacturer's date2018-09-24
NHTSA componentELECTRICAL SYSTEM; EQUIPMENT

NHTSA's summary

On some Tucson (TL) vehicles may experience the illumination of various warning lamps including the brake warning lamp and other lamps. This bulletin describes the procedure to apply sealant to the vacuum pump or replace the vacuum pump cap based on vehicle inspection.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Equipment and accessories

Vehicles listed
HYUNDAI TUCSON2016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V8420002016-11-21. TRAILER HITCHES; ELECTRICAL SYSTEM:WIRING
16V6280002016-08-30. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
20161252016-03-21. Accessories

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
26-EM-014H TSB2026-09-22. Service bulletin. Some Tucson (TL) vehicles equipped with a 2.0L engine may exhibit a continued DTC P132600 after an ECM logic update has been performed per TSB 24-01-068H, Engine Monitoring Logic (Service Campaign 966). This bulletin provides instructions to inspect and resolve other engine mechanical issues and if DTC P132600 remains, then a procedure and manual mode passwords are given to perform the update again in manual mode to resolve this condition.
25-01-089H DCS2026-01-06. Other. Upon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. This repair procedure is being provided in addition to the previous Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1).
25-01-089H DN2026-01-06. Other. In addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental security measure is to be installed at the ignition switch location and provides additional protection against the social media theft method. Vehicles not equipped with an immobilizer during production at the factory are eligible. The repair procedure shall be performed and claimed upon customer request only. Any future repairs to these vehicles in which an installed ignition cylinder protector impacts required parts and/or labor, shall be covered by HMA. Please see TSB 25-01-089H for details.
25-01-089H TSB2026-01-06. Other. This bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.
P33 OL2025-12-19. Other. In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.
25-01-024H-1 TSB2025-05-27. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
25-01-024H EM2025-04-18. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
25-01-024H TSB2025-03-25. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
24-01-050H-12024-09-25. Service campaign. This bulletin provides instructions to update the 4th generation AVN head unit software to ensure the SIM Over The Air function for the Bluelink service is operating properly.
24-01-050H2024-07-02. Service bulletin. This bulletin provides instructions to update the 4th generation AVN head unit software to ensure the SIM Over The Air function for the Bluelink service is operating properly.