WenmarOpen by Wenmar Pro

Service bulletin 18-025-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10144863
Published by NHTSA2018-09-24
Manufacturer's number18-025-15
Manufacturer's date2015-03-31
NHTSA componentEQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

NHTSA's summary

Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a slight, audible, spark knock at times. This typically occurs in stop and go traffic during light tip-in acceleration with the AC off. No Diagnostic Trouble Codes (DTCs) will set as a result of this condition.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories, Heating and air conditioning, Transmission and driveline, Automatic transmission, Transmission control module

Vehicles listed
JEEP COMPASS2011, 2012, 2013, 2014
JEEP PATRIOT2011, 2012, 2013, 2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
U672023-01-17. Service bulletin. Some of the above-involved vehicles may exceed NOx (Oxides of Nitrogen) emission level standards due to loss of catalytic converter efficiency
V512022-12-19. Service bulletin. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
18-011-132022-07-25. Service bulletin. Flash: MIL Illumination P050B and/or Rattle/Clatter Sound on Cold Start-up This bulletin involves installing revised heater hoses, routing the purge solenoid wire harness, and installing revised Powertrain Control Module (PCM) software. Customers may indicate that they hear a clatter or rattle noise coming from the engine on initial start up after a long cold soak. A small number of customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set. P050B - Cold Start Ignition Timing Performance
18-040-152018-11-26. Service bulletin. Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code (DTC) P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1 has been set in the PCM. In addition, customers may report that the vehicle has failed the emissions certification test. Upon further investigation, it may be found that the Individual Cylinder Fuel Control (ICFC) monitors are reporting as failing to the scan tool even though the monitors have actually passed.
18-064-162018-05-21. Service bulletin. Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: · **U0140 - Lost Communication With Body Control Module (TIPM).** · P219A - Air-Fuel Ratio Cylinder Imbalance Bank 1. **The following software enhancements are also available: · Cruise control enhancements. · Engine is hard to start at temperatures -29°C (-20°F) for vehicles utilizing E15 fuel only.** In addition, customers may report that the vehicle has failed the emissions certification test. Upon further investigation, it may be found that the Individual Cylinder Fuel Control (ICFC) monitors are reporting as failing to the scan tool even though the monitors have actually passed.
18-011-132018-05-14. Service bulletin. Flash: MIL Illumination P050B and/or Rattle/Clatter Sound on Cold Start-up This bulletin involves installing revised heater hoses, routing the purge solenoid wire harness, and installing revised Powertrain Control Module (PCM) software. Customers may indicate that they hear a clatter or rattle noise coming from the engine on initial start up after a long cold soak. A small number of customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set. P050B - Cold Start Ignition Timing Performance
18-011-132018-02-21. Service bulletin. Flash: MIL Illumination P050B and/or Rattle/Clatter Sound on Cold Start-up This bulletin involves installing revised heater hoses, routing the purge solenoid wire harness, and installing revised Powertrain Control Module (PCM) software. Customers may indicate that they hear a clatter or rattle noise coming from the engine on initial start up after a long cold soak. A small number of customers may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set. P050B - Cold Start Ignition Timing Performance
21-042-152015-07-27. Service bulletin. CHRYSLER 2014 JEEP COMPASS/PATRIOT: INFORMATION INVOLVES REPROGRAMMING WITH LATEST SOFTWARE, THE TRANSMISSION CONTROL MODULE. *LJ UPDATED 12/3/15 *CN
18-009-112011-06-08. Service bulletin. CHRYSLER: MALFUNCTION INDICATION LIGHT IS ON AND THE PROCESS IS NOTED FOR SOFTWARE PROGRAMMING. 2011 COMPASS AND CALIBER. *RM