WenmarOpen by Wenmar Pro

Service bulletin 23-005-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10144820
Published by NHTSA2018-09-24
Manufacturer's number23-005-15
Manufacturer's date2015-02-06
NHTSA componentSTRUCTURE

NHTSA's summary

Decklid Contacts The Body Side Aperture Above The Stop Lamp This bulletin involves adjusting the decklid and touching up paint as required. The customer may describe contact between the decklid and body side aperture (1) and/or chipped paint (2) on left or right side above the stop lamp (Fig. 1). Fig. 1 Contact Areas And Chipped Paint 1 - Decklid To Body Side Aperture Contact 2 - Chipped Paint

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
DODGE CHARGER2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V0430002016-01-28. STRUCTURE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
31001232024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001232023-04-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31-002-222023-01-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31001222023-01-09. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
23005152023-01-09. Service bulletin. Decklid Contacts The Body Side Aperture Above The Stop Lamp This bulletin involves adjusting the decklid and touching up paint as required. The customer may describe contact between the decklid and body side aperture (1) and/or chipped paint (2) on left or right side above the stop lamp (Fig. 1). Fig. 1 Contact Areas And Chipped Paint 1 - Decklid To Body Side Aperture Contact 2 - Chipped Paint
31001222022-10-31. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31001222022-10-31. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
31002202022-10-17. Service bulletin. Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
23005152022-10-17. Service bulletin. Decklid Contacts The Body Side Aperture Above The Stop Lamp This bulletin involves adjusting the decklid and touching up paint as required. The customer may describe contact between the decklid and body side aperture (1) and/or chipped paint (2) on left or right side above the stop lamp (Fig. 1). Fig. 1 Contact Areas And Chipped Paint 1 - Decklid To Body Side Aperture Contact 2 - Chipped Paint
23-005-152022-09-26. Service bulletin. Decklid Contacts The Body Side Aperture Above The Stop Lamp This bulletin involves adjusting the decklid and touching up paint as required. The customer may describe contact between the decklid and body side aperture (1) and/or chipped paint (2) on left or right side above the stop lamp (Fig. 1). Fig. 1 Contact Areas And Chipped Paint 1 - Decklid To Body Side Aperture Contact 2 - Chipped Paint