Service bulletin 23-009-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10144807
Published by NHTSA	2018-09-24
Manufacturer's number	23-009-15
Manufacturer's date	2015-03-04
NHTSA component	STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT

NHTSA's summary

Front Window Popping/Clicking Noise While Powered Up Or Down This bulletin involves lubricating the window to regulator attachment point. The customer may describe a popping/clicking noise while powering the right and/or left front door window up or down.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
DODGE DART	2014, 2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
31-001-25 REV. A	2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B	2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25	2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
31-001-24	2024-07-30. Service bulletin. "Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
3100123	2024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100123	2023-04-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31-002-22	2023-01-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100122	2023-01-09. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
18-023-16	2022-12-19. Service bulletin. Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) · P050D - Cold Start Rough Idle. · P0335 - Crankshaft Position Sensor Circuit. · P1607 - PCM Internal Shutdown Timer Rationality. · P0133 - O2 Sensor 1/1 Slow Response. · P0456 - EVAP System Small Leak. · P0480 - Cooling Fan 1 Control Circuit/Open. · U0402 - Implausible Data Received From TCM. · P2172 - High Airflow/Vacuum Leak Detected. · P1D73 - AGS Performance. · U0140 - Lost Communication With Body Control Module. · P0441 - Evap Purge System Performance. · P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: · Engine Startup Flare and Idle Surge. · Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) · P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range. · U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. · P1185 - General Pressure Sensor Correlation. · P050D - Cold Start Rough Idle. · P0133 - O2 Sensor 1/1 Slow Response. · P0456 - Evap System Small Leak. · P219A - Bank 1 Air-Fuel Ratio Imbalance. · P2172 - High Airflow/Vacuum Leak Detected. · P1D73 - AGS Performance. · U0140 - Lost Communication With Body Control Module.
1802316REVA	2022-12-19. Service bulletin. Flash: 2.4L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) · P050D - Cold Start Rough Idle. · P0335 - Crankshaft Position Sensor Circuit. · P1607 - PCM Internal Shutdown Timer Rationality. · P0133 - O2 Sensor 1/1 Slow Response. · P0456 - Evap System Small Leak. · P0480 - Cooling Fan 1 Control Circuit/Open. · U0402 - Implausible Data Received From TCM. · P2172 - High Airflow/Vacuum Leak Detected. · P1D73 - AGS Performance. · U0140 - Lost Communication With Body Control Module. · P0441 - Evap Purge System Performance. · P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: · Engine Startup Flare and Idle Surge. · Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) · P050D - Cold Start Rough Idle. · P0133 - O2 Sensor 1/1 Slow Response. · P0456 - Evap System Small Leak. · P219A - Bank 1 Air-Fuel Ratio Imbalance. · P2172 - High Airflow/Vacuum Leak Detected. · P1D73 - AGS Performance. · U0140 - Lost Communication With Body Control Module. · P0116 - Engine Coolant Temperature Sensor 1 Performance. · P050B - Cold Start Ignition Timing Performance. · P061A - Level 2 Torque Performance. · P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made: · Low Idle Speed After Cold Start between -10°C to 0°C (14°F to 32°F).