Service bulletin 9003225
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10144799 |
| Published by NHTSA | 2018-09-24 |
| Manufacturer's number | 9003225 |
| Manufacturer's date | 2015-03-11 |
| NHTSA component | STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT |
NHTSA's summary
Part Description: Soft Top Quarter Window or Rear Window Issue Description: Please cycle the zipper 5-10 times when there is a single skipped zipper tooth.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame
| JEEP WRANGLER | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 100192 | 2024-10-02. Service bulletin. BOW - FOLDING TOP |
|---|---|
| S1723000037 REV.A | 2024-06-11. Service bulletin. Freedom Panel Underside Rough And Or White Coating Flaking |
| 2303414 | 2023-02-21. Service bulletin. Cowl Trim Panel Fastener Water Leak |
| 2303414 | 2023-01-17. Service bulletin. Cowl Trim Panel Fastener Water Leak |
| 2302714 | 2023-01-17. Service bulletin. Zinc Coating Missing From Left Rear Close Out Panel |
| 2302214 | 2023-01-17. Service bulletin. Tailgate Retaining Strap Over Extends And Breaks |
| 2303614 | 2023-01-17. Service bulletin. Water Leak At Hard Top Rear Seam This bulletin involves replacing the hard top. . The customer may describe water dripping from the top, running down the inside of the back glass, or running down the inside rear D-pillar. |
| 9003182 | 2023-01-17. Service bulletin. Part Description: Hard Top Flipper Glass Prop Rod Issue Description: Having a light oil sheen on the steel shaft of the prop rod is correct and acceptable. Please do not replace the Prop Rod for this condition. |
| 3100122 | 2023-01-09. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 2300415 | 2023-01-09. Service bulletin. Side Steps Are Missing This bulletin involves inspecting for and if necessary installing the Side Steps. Side Steps are missing. Inspect for and if necessary install the Side Steps. |