# Service bulletin 05\-64\-18

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10143871
- Published by NHTSA: 2018\-08\-20
- Manufacturer's number: 05\-64\-18
- Manufacturer's date: 2018\-07\-09
- NHTSA component: WHEELS

## NHTSA's summary

This Service Information bulletin announces a change made to the rear frame stay mounting flange bolts. The new flange bolts \(5 used per side\) have been lengthened by 2mm to an overall length of 25mm.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143871-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143871-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Wheels

## Vehicles listed

- 2014 to 2016 SUBARU LEGACY
- 2014 to 2016 SUBARU OUTBACK

## Other bulletins for the same vehicles and component

- [05\-97\-26](/bulletins/11032035.md), 2026-05-04, Service bulletin: STEERING; WHEELS. This Bulletin provides the diagnostic procedures to be followed when addressing customer concerns of steering wheel/vehicle body vibration when driving at highway speeds when tire/wheel balance is suspected.
- [1519216](/bulletins/10234277.md), 2023-04-17, Service bulletin: WHEELS. Loose / Gapping Accessory Front Wheel Arch Moldings
- [05\-85\-21R](/bulletins/10191664.md), 2021-05-05, Service bulletin: ELECTRICAL SYSTEM; WHEELS. This bulletin announces a design change made to the TPMS valve assemblies.
- [05\-67\-19](/bulletins/10154418.md), 2019-03-11, Service bulletin: WHEELS; WHEELS:HUB. This bulletin announces a slight design change made to the sealing areas of the wheel hub assemblies for the models as listed above. The change was made to enhance productivity during the vehicle assembly process.
- [06\-49\-15](/bulletins/10090421.md), 2017-02-03, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; WHEELS. IN RESPONSE TO ISOLATED REPORTS OF CRACKED OR BROKEN ABS WHEEL SPEED SENSOR HARNESS RETAINING CLIPS CAUSED BY REACTION WITH ACIDS USED IN SOME WHEEL CLEANERS, THE CLIP MATERIAL HAS BEEN CHANGED TO POLYPROPYLENE \(PPO\).
- [15\-192\-16](/bulletins/10081080.md), 2016-09-28, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; WHEELS. THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF LOOSE OR GAPPING ACCESSORY FRONT WHEEL ARCH MOLDING\(S\) \(E201SAL000 MOLDING KIT\). THERE ARE 2 RETAINING CLIPS ON EACH MOLDING WHICH HAVE BEEN IMPROVED TO ENHANCE RETENTION OF THE MOLDING TO THE FENDER LIP THEREBY ELIMINATING ANY GAP BETWEEN THE MOLDING AND THE BODY. THIS BULLETIN APPLIES TO THE FRONT WHEEL ARCH MOLDINGS ONLY.
- [15\-192\-16](/bulletins/10075064.md), 2016-06-22, Service bulletin: WHEELS. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

JSON: [/v1/bulletins/10143871](/v1/bulletins/10143871)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2005-64-18&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10143871&vehicle=Service%20bulletin%2005-64-18)