WenmarOpen by Wenmar Pro

Service bulletin B614417

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10143561
Published by NHTSA2018-08-06
Manufacturer's numberB614417
Manufacturer's date2018-05-01
NHTSA componentVISIBILITY; ELECTRICAL SYSTEM

NHTSA's summary

WINDOW WILL NOT CLOSE AFTER REPEATED BUTTON PUSHES: One or more power windows stops operating after repeated button pushes. This usually occurs when trying to close the window.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Glass, wipers and mirrors

Vehicles listed
BMW 640I2018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
B7201252026-02-23. Warranty extension. A situation may occur where the front passenger seat is not occupied; however, a “fasten seat belt” warning and a front passenger seat air bag deactivation message appears. If the situation is currently present, sit in the seat and move the seat to a slightly different position. The POL (Passenger Occupancy Light) light should now function correctly. In some cases, the Air bag Warning Light was illuminated, and the following Advanced Crash Safety Module (ACSM) fault is stored: 930A1C - Front passenger seat occupancy detection transmitting fault (moisture)
B7201252025-04-18. Warranty extension. The Supplemental Restraint Systems (SRS) Front Passenger’s Seat Occupancy Capacitive Interior Sensor (CIS) Mat for defects in materials and/or workmanship that causes a false seat occupancy alert to occur has been extended to 10 years / 120,000 miles as determined from the vehicle's original in-service / first delivery date.
B5108192024-02-01. Service bulletin. The basic conditions for initializing the power windows are not met.
B6105242024-02-01. Service bulletin. The Central Information Display goes black intermittently due to resets of the Head Unit (HU-H3). FaultB7F8F9 â“ âHU-H: Resetâ will be stored in the HU-H3.
B6113052024-02-01. Service bulletin. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged battery” complaints.
B6408212023-07-24. Service bulletin. The air conditioning cycles from cold to warm air while driving or while at a stand still. The vent outlet temperatures vary by 25 degrees Fahrenheit or more (38 F to 60 F +) without changing any climate control settings.
B6308212023-07-24. Service bulletin. Headlight check control (CC) message 128 "High beam headlight failure" is displayed. The following fault codes are stored during a vehicle test: 80419A - Left high-beam headlight: Short circuit and/or 8041A5 - light outputs: Number of permitted short circuit cycles exceeded
B6515232023-06-26. Service bulletin. After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
B6101232023-06-26. Service bulletin. Due to a software error, the vehicle sporadically does not achieve sleep mode. As a result, the 12-volt battery becomes discharged and may cause a no-start condition.
SIB6608232023-05-15. Service bulletin. Issues with the various functions of the camera-based driver assistance systems (KAFAS system) can possibly lead to following customer complaints: KAFAS camera system deactivates itself, due to system restrictions that are not clear to the customer KAFAS camera system cannot be activated due to system restrictions that are not clear to the customer Road signs are sporadically not detected.