# Service bulletin 122\-P5G7U\-07

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10143521
- Published by NHTSA: 2018\-08\-06
- Manufacturer's number: 122\-P5G7U\-07
- Manufacturer's date: 2018\-06\-28
- NHTSA component: ELECTRICAL SYSTEM:WIRING; ENGINE

## NHTSA's summary

Oil in the wiring harness. If oil is found in the engine wiring harness during a repair, the wiring harness and all the affected components \(including the oil pump control valve\) must be replaced.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143521-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143521-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Engine, Wiring and fuses

## Vehicles listed

- 2016 PORSCHE 718 BOXSTER
- 2017 to 2018 PORSCHE 718 BOXSTER
- 2012 to 2018 PORSCHE 911
- 2009 PORSCHE 911 GT2
- 2010 to 2011 PORSCHE 911 GT3
- 2012 to 2015 PORSCHE BOXSTER
- 2009 to 2010 PORSCHE BOXSTER \(987\)
- 2011 PORSCHE BOXSTER S
- 2008 to 2010 PORSCHE CAYENNE
- 2013 to 2018 PORSCHE CAYENNE
- 2011 to 2012 PORSCHE CAYENNE S
- 2010 PORSCHE PANAMERA
- 2013 to 2018 PORSCHE PANAMERA
- 2011 to 2012 PORSCHE PANAMERA S

## Other bulletins for the same vehicles and component

- [No. 07\-21](/bulletins/10209767.md), 2022-04-05, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH. Installation and conversion instructions for the dashcam on the 718.
- [No. 2024](/bulletins/10180568.md), 2020-10-01, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES. Information on new special tool \- VAS 1978/35 Connector Release Tools.
- [122\-T8S4T\-08](/bulletins/10120612.md), 2017-10-25, Service bulletin: ELECTRICAL SYSTEM:WIRING. Cause Incorrect wiring for rear lid release switch. Date of introduction Modified wiring is used during production from November 7, 2016. Remedial action In the event of a customer complaint, rework rear lid release switch wiring using a cable adapter.
- [122\-Y8S5J\-08](/bulletins/10120611.md), 2017-10-25, Service bulletin: ELECTRICAL SYSTEM:WIRING. Subject: Wire harness for PASMvalve unit Information: The wire harness for the PASM valve unit is not routed correctly in the area around the heat protection panels for the valve unit on the affected vehicles. Due to relative movements while driving and if significant amounts of dirt get in, this can cause chafing on the wire harness and as a result, faults can be entered in the fault memory and the warning "Chassis system fault" may be displayed in the instrument cluster. As a result, the vehicle level can no longer be set.
- [122\-C4Y4T\-10](/bulletins/10119305.md), 2017-10-15, Service bulletin: ELECTRICAL SYSTEM:WIRING. Cause: The wire harness for the TPM control unit can interfere with communication between the TPM control unit and the TPM sensors. The wire harness for the TPM control unit is not routed correctly in the rear axle area. Remedial Action: The routing of the wire harness is changed using an extension of the existing harness wire.
- [122\-L5P2V\-06](/bulletins/10109315.md), 2017-08-01, Service bulletin: ELECTRICAL SYSTEM:WIRING. Concerns: Wire harness for exterior mirrors Information: This is to inform you of a voluntary Workshop Campaign on the above\-mentioned vehicles. There is the possibility that the wire harnesses in both exterior mirrors may not be routed correctly. As a result, the wire harnesses can become damaged when the exterior mirrors are folded in and the electric functions of the exterior mirrors can fail.
- [122\-W5A8M\-06](/bulletins/10109312.md), 2017-08-01, Service bulletin: ELECTRICAL SYSTEM:WIRING; ELECTRICAL SYSTEM. Concerns: Wire harness for engine Information: This is to inform you of a voluntary Workshop Campaign on the above\-mentioned vehicles. There is the possibility that moisture can get into the ground splice connections in the wire harness for the engine. As a result, ground splice connections can become corroded over the service life of the vehicles. This can cause signal faults in the oil pressure, oil level and oil temperature sensors, and therefore cause the Check Engine warning light to be activated.
- [122\-Q5C4S\-06](/bulletins/10108675.md), 2017-07-28, Service bulletin: ENGINE; ELECTRICAL SYSTEM:WIRING. Issue: Oil in the wiring harness. Information: If oil is found in the engine wiring harness during a repair, the wiring harness and all the affected components \(including the oil pump control valve\) must be replaced.
- [122\-K9M6Z\-06](/bulletins/10108674.md), 2017-07-28, Service bulletin: ELECTRICAL SYSTEM:WIRING; ENGINE. Concerns: Contacts on connector/wiring harness for DME control unit Information: Damaged contacts on connector/wiring harness for DME control unit. Due to problems caused by damaged contacts on the connector/wiring harness for the DME control unit during electric fault finding.
- [9709](/bulletins/10057134.md), 2015-04-21, Service bulletin: ELECTRICAL SYSTEM:WIRING. PORSCHE: MODEL YEAR 2010\-2013: COVER ON POWER DISTRIBUTOR MUST BE SEALED TO AVOID CORROSION. \*LJ

JSON: [/v1/bulletins/10143521](/v1/bulletins/10143521)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20122-P5G7U-07&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10143521&vehicle=Service%20bulletin%20122-P5G7U-07)