Service bulletin 2013-04
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10143119 |
| Published by NHTSA | 2018-07-23 |
| Manufacturer's number | 2013-04 |
| Manufacturer's date | 2013-04-30 |
| NHTSA component | EXTERIOR LIGHTING:TAIL LIGHTS:SWITCH; ELECTRICAL SYSTEM; SERVICE BRAKES, AIR:ANTILOCK; SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS |
NHTSA's summary
Instances of ABS (Anti-Lock Braking System) tell tale lamp illumination accompanied with fault code C0460 (pressure sensor failure) have been reported back to Lotus Cars. Although the pressure sensor located within the ABS module is non-serviceable; another potential cause of this problem is the brake light switch plunger being incorrectly set. Incorrect setting of the switch plunger will result in the ABS brake line pressure being too high at the time of brake light activation, thus generating a fault code and illuminating the ABS or Service tell tale lamp.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Brakes, Electrical system, Lighting, Anti-lock brakes, Brake hoses and lines, Tail lights
Trouble codes named
C0460
| LOTUS EVORA | 2010, 2011, 2012, 2013 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2015-03 | 2018-07-23. Service bulletin. Application of silicone grease to brake light switch plunger to improve durability. Several instances of brake light switch renewal under warranty have been reported due to the illumination of the ABS (Anti-Lock Braking System) tell tail lamp accompanied with the generation of diagnostic trouble code C0340 - brake light switch. |
|---|---|
| 2013-17 | 2018-07-23. Service bulletin. Brake hose/pipe inspection. The routing of all brake hoses and pipes is set during production to ensure that they cannot come into contact with any other ancillary components regardless of the vehicles suspension travel range or steering movement. |
| SB-2013-04 | 2013-05-17. Service bulletin. LOTUS: DUE TO FAULT CODE C0460 (PRESSURE SENSOR FAILURE) TAIL LAMP OF ABS (ANTILOCK BRAKING SYSTEM) WILL ILLUMINATE AND A POTENTIAL CAUSE IS BRAKE LIGHT SWITCH PLUNGER INCORRECTLY SET. MODEL ELIXE, EXIGE, EVORA. NO MODEL YEARS. *PE |