# Service bulletin SSM 47331

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10143079
- Published by NHTSA: 2018\-07\-23
- Manufacturer's number: SSM 47331
- Manufacturer's date: 2018\-06\-01
- NHTSA component: EQUIPMENT; ENGINE

## NHTSA's summary

Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8\-Jan\-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower\(s\) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z\-6564\-A, not just the faulty roller follower\(s\). When replacing the camshaft roller followers, refer to Workshop Manual \(WSM\), Section 303\-01.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143079-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10143079-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine, Equipment and accessories

## Vehicles listed

- 2005 to 2015 FORD EXPEDITION
- 2006 to 2010 FORD EXPLORER
- 2007 to 2010 FORD EXPLORER SPORT TRAC
- 2005 FORD F SUPER DUTY
- 2008 FORD F SUPER DUTY
- 2004 to 2010 FORD F\-150
- 2006 to 2009 FORD F\-53
- 2011 to 2016 FORD F\-53
- 2005 to 2010 FORD MUSTANG
- 2006 to 2007 FORD SUPER DUTY
- 2009 to 2010 FORD SUPER DUTY
- 2005 LINCOLN MARK LT
- 2006 to 2008 LINCOLN MARK LT
- 2005 to 2014 LINCOLN NAVIGATOR
- 2006 to 2010 MERCURY MOUNTAINEER

## Recalls for the same vehicles and component

- [08V523000](/recalls/nhtsa/08V523000.md), 2008-10-08: ENGINE AND ENGINE COOLING

## Other bulletins for the same vehicles and component

- [SSM 52476](/bulletins/10254138.md), 2024-05-03, Service bulletin: EQUIPMENT. All accessory stick\-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated \(wired\) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System \(DPES\); dealership management can authorize users. The authorized user must go to FMCDealer.com \> Parts and Service \> Parts Product Line Information \> Keys/Entry Devices \> Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- [TSB160066](/bulletins/10205031.md), 2021-12-20, Service bulletin: EQUIPMENT; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\). Touchscreen navigation system \- arabic language \- blank screen
- [Service Informat](/bulletins/10204989.md), 2021-12-20, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM. Online automotive service information system for April 2016\-AM/FM/CD or sync with a 4.2 inch screen may exhibit a blank screen and no a;udio after a crank event.
- [TSB160001](/bulletins/10204987.md), 2021-12-20, Service bulletin: FUEL/PROPULSION SYSTEM; ENGINE; EQUIPMENT; POWER TRAIN; AIR BAGS; STRUCTURE. 49 CFR Part 579.5 Monthly Communications \- March 2016 Air bag warning light illuminated with diagnostic trouble code \(DTC\) B141B and/or B141C
- [LTR3756](/bulletins/10204986.md), 2021-12-20, Service bulletin: FUEL/PROPULSION SYSTEM; AIR BAGS; ENGINE; STRUCTURE; POWER TRAIN; ELECTRICAL SYSTEM. 49 CFR Part 579.5 Monthly Communications \- January 2016
- [SSM 49821](/bulletins/10194428.md), 2021-06-01, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE AND ENGINE COOLING. Some 2015\-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes \(DTC\) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis \(PC/ED\) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards \(SLTS\) Manual.
- [19N01\-S3](/bulletins/10183669.md), 2020-12-05, Service bulletin: EQUIPMENT; POWER TRAIN; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Certain 2011 \- 2013 Model Year F\-150 and 2012\- 2013 Model Year Expedition/Navigator Vehicles Equipped with A 6R80 Transmission Transmission Molded Leadframe Extended Coverage In some of the affected vehicles, an output shaft speed \(OSS\) sensor failure may result in an illuminated malfunction indicator light \(MIL\) and/or wrench light in the instrument cluster with diagnostic trouble codes \(DTCs\) P0720, P0722, P0731 and/or P1500 stored in the powertrain control module \(PCM\).
- [TSB 20\-2307](/bulletins/10181917.md), 2020-11-05, Service bulletin: ELECTRICAL SYSTEM; WHEELS; EQUIPMENT. Some 2003\-2020 Expedition/Navigator and 2006\-2020 F\-150 vehicles equipped with TOD transfer cases may exhibit grinding/clicking/ratcheting noise from the front wheel area. This may be due to partial engagement of the integrated wheel ends \(IWE\). To correct this condition, follow the Service Procedure steps to remove and cap the vacuum supply line.
- [SSM 49210](/bulletins/10180428.md), 2020-10-06, Service bulletin: ENGINE AND ENGINE COOLING. Some 2009\-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O\-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual \(WSM\), Section 303\-00 General Information \> Diagnosis and Testing \> Engine \> Engine Oil Leaks \- Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O\-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303\-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards \(SLTS\) Manual.
- [TSB 20\-2189](/bulletins/10176835.md), 2020-07-06, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; VEHICLE SPEED CONTROL:ACCELERATOR PEDAL; EQUIPMENT. This article supersedes TSB 20\-2028 to update the description of Labor Operation D. Some 2013\-2018 F\-150/Expedition/Navigator vehicles equipped with 4\-wheel drive \(4WD\) may exhibit an intermittent grinding noise while driving in 2\-wheel drive \(2WD\) mode most commonly on acceleration. This may be due to a loss of vacuum to the integrated wheel end \(IWE\) actuators and/or wear of the IWE components. To correct the condition, follow the Service Procedure steps to reprogram the transfer case control module \(TCCM\) and replace any worn vacuum and/or IWE components.

JSON: [/v1/bulletins/10143079](/v1/bulletins/10143079)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM%2047331&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10143079&vehicle=Service%20bulletin%20SSM%2047331)