WenmarOpen by Wenmar Pro

Service bulletin 14-002-16

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10141268
Published by NHTSA2018-06-18
Manufacturer's number14-002-16
Manufacturer's date2016-05-24
NHTSA componentFUEL SYSTEM, GASOLINE; FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK

NHTSA's summary

Replace Fuel Tank This bulletin involves replacing the fuel tank. Some vehicles may have been built with a fuel tank that is out of specifications.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Fuel system

Vehicles listed
JEEP WRANGLER2016

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
14002162022-12-19. Service bulletin. Replace Fuel Tank This bulletin involves replacing the fuel tank. Some vehicles may have been built with a fuel tank that is out of specifications.
90036652022-10-31. Service bulletin. Fuel Tank and Fuel Evap System Components 1) For JK MIL On ? P0441: Before replacing this part due to fault code P0441, check for restriction due to plastic over-flash in the Purge Hose Port of the Intake Manifold. If there is flash in the Purge Hose Port of the Intake Manifold and the vehicle is 2016 MY then replace the Intake Manifold and send to QEC. Otherwise, remove the flash with a 5/32? drill bit and clean the Intake Manifold of any flash debris. If the fault code P0441 continues after repairing the Intake Manifold, then send Freeze Frame data of P0441 to Michael.Ade@FCAgroup.com and contact Sylvia Lopez at cell number (248) 520-9734. If you don`t receive response within 15 minutes, please continue with the normal repair procedure. 2) For RT MIL On ? P0456: If ESIM needs to be replaced for fault code P0456, check the Vapor Line, Fresh Air Filter and the Black Frame Rail Blocker for water ingestion. If water ingestion is found, then replace the ESIM part number 04861962AB and the Jumper, Vent Recirculation Tube part number 04721757AI. Please contact Release Engineer Alfredo Salituro @ 213-700-5359 before performing repair service. If you do not receive a response within 15 minutes, please continue with the normal repair procedure.
90036652022-10-24. Service bulletin. Fuel Tank and Fuel Evap System Components Before replacing this part due to fault code P0441, check for restriction due to plastic over-flash in the Purge Hose Port of the Intake Manifold. If there is flash in the Purge Hose Port of the Intake Manifold and the vehicle is 2016 MY then replace the Intake Manifold and send to QEC. Otherwise, remove the flash with a 5/32? drill bit and clean the Intake Manifold of any flash debris. If the fault code P0441 continues after repairing the Intake Manifold, then send Freeze Frame data of P0441 to Michael.Ade@FCAgroup.com and contact Sylvia Lopez at cell number (248) 520-9734. If you don't receive response within 15 minutes, please continue with normal repair procedure.
90037682022-10-24. Service bulletin. Fuel Tank 1) Before replacing this part due to fault code P0441, check for restriction due to plastic over-flash in the Purge Hose Port of the Intake Manifold for the ERB (3.6L engine only). If there is flash in the Purge Hose Port of the Intake Manifold, then remove the flash with a 5/32? drill bit and clean the Intake Manifold of any flash debris. 2) Before replacing this part due to ?Hard to Fuel Fill? condition, check the Fuel Filler Tube for restriction in the Vent Tube. If there is blockage, then replace the Fuel Filler Tube. Contact Sylvia H. Lopez at (248) 520-9734 before replacing the Tank. If you do not receive a call back within 15 minutes, then continue the repair.
90036652022-09-26. Service bulletin. Fuel tank and fuel evap system components.
68065575A2022-09-15. Service bulletin. Fuel Pump: JK ONLY: If a customer has a P0461 fault code (Fuel level sensor 1 performance) please take a picture of the fuel module orientation / alignment to the fuel tank flange as it is received. Send the picture to Bob.Bruni@fcagroup.com. Upon module removal inspect and determine if the float travel has been hampered by contact with the tank walls or internal line. Engineering is trying to determine if misoriented module will illuminate a P0461 FC. Please include the VIN with the picture.~
68065575A2022-08-22. Service bulletin. Fuel Pump: JK ONLY: If a customer has a P0461 fault code (Fuel level sensor 1 performance) please take a picture of the fuel module orientation / alignment to the fuel tank flange as it is received. Send the picture to Bob.Bruni@fcagroup.com. Upon module removal inspect and determine if the float travel has been hampered by contact with the tank walls or internal line. Engineering is trying to determine if misoriented module will illuminate a P0461 FC. Please include the VIN with the picture.~
90036942022-08-08. Service bulletin. Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
90036652021-05-03. Service bulletin. Fuel tank and fuel evap system components.
14-002-162020-10-26. Service bulletin. Replace Fuel Tank This bulletin involves replacing the fuel tank. Some vehicles may have been built with a fuel tank that is out of specifications.