# Service bulletin 9003178

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10139713
- Published by NHTSA: 2018\-06\-11
- Manufacturer's number: 9003178
- Manufacturer's date: 2014\-11\-26
- NHTSA component: STEERING

## NHTSA's summary

The steering angle sensor on Fiat 500 is serviced as part of the Electric Power Steering \(EPS\) steering column not the Clockspring.\~ Please refer to section 19 EPS steering column for service procedures.\~

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10139713-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10139713-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Steering

## Vehicles listed

- 2013 to 2015 FIAT 500E

## Other bulletins for the same vehicles and component

- [0810314](/bulletins/10229891.md), 2023-01-17, Service bulletin: ELECTRICAL SYSTEM; STEERING; WHEELS. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [0810314REVA](/bulletins/10221059.md), 2022-09-26, Service bulletin: ELECTRICAL SYSTEM; STEERING; WHEELS. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [08\-103\-14](/bulletins/10218230.md), 2022-08-22, Service bulletin: ELECTRICAL SYSTEM; WHEELS; STEERING. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [9003178](/bulletins/10218179.md), 2022-08-22, Service bulletin: STEERING. Clockspring/ Steering Column Module.
- [S2019000002](/bulletins/10175674.md), 2020-05-26, Service bulletin: STEERING. Hands On Steering Wheel Message In EVIC
- [08\-049\-15 REV A](/bulletins/10160016.md), 2019-05-20, Service bulletin: ELECTRICAL SYSTEM; STEERING; STRUCTURE. Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a Body Control Module \(BCM\) Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System \(TPMS\) ?Winter Mode? feature is missing.
- [19\-002\-15](/bulletins/10150520.md), 2018-12-10, Service bulletin: STEERING. Clunking Noise From The Steering Column While Turning The Steering Wheel This bulletin involves replacing the steering intermediate shaft. Clunking, popping, knocking noise from the lower steering column while turning the steering wheel.
- [08\-049\-15](/bulletins/10148900.md), 2018-11-26, Service bulletin: ELECTRICAL SYSTEM; STEERING. Inoperative Blue And Me Steering Wheel Button This bulletin involves performing a BCM Proxi Configuration. The customer may notice that the buttons on the steering wheel for Blue and Me may stop working. Also for customers in Canada and Mexico, they may notice that the Tire Pressure Monitor System \(TPMS\) ?Winter Mode? feature is missing.
- [08\-103\-14](/bulletins/10139863.md), 2018-06-11, Service bulletin: STEERING; ELECTRICAL SYSTEM:SOFTWARE. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [19\-002\-15](/bulletins/10057938.md), 2015-07-15, Service bulletin: STEERING:COLUMN. CHRYSLER 2012\-2015 FIAT 500: SERVICE BULLETIN INFORMATION AND REPAIR PROCEDURE FOR NOISE IN THE STEERING COLUMN WHILE TURNING THE STEERING WHEEL. \*LJ

JSON: [/v1/bulletins/10139713](/v1/bulletins/10139713)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209003178&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10139713&vehicle=Service%20bulletin%209003178)