# Service bulletin 08\-051\-14

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10139661
- Published by NHTSA: 2018\-06\-11
- Manufacturer's number: 08\-051\-14
- Manufacturer's date: 2014\-06\-05
- NHTSA component: STRUCTURE; ELECTRICAL SYSTEM

## NHTSA's summary

Odometer Flashing And B10AA\-4A\- Check Configuration Failed \- Incorrect Component Installed This bulletin involves a Body Control Module \(BCM\) Proxi Alignment, for proper operation. The customer may notice that the Odometer is flashing. On further inspection an active DTC may be found, B10AA\-4A\- Check Configuration Failed \- Incorrect Component Installed.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2014/MC-10139661-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2014/MC-10139661-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame, Electrical system

## Trouble codes named

B10AA

## Vehicles listed

- 2014 FIAT 500L

## Other bulletins for the same vehicles and component

- [S1408000384](/bulletins/10251783.md), 2024-03-18, Service bulletin: ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor \(IBS\) State of Charge \(SOC\) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes \(DTCs\), or Battery Warning Lamp On
- [9100226](/bulletins/10248509.md), 2024-01-08, Service bulletin: ELECTRICAL SYSTEM. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100226](/bulletins/10244348.md), 2023-10-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [S1408000384](/bulletins/10234420.md), 2023-04-17, Service bulletin: ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor \(IBS\) State of Charge \(SOC\) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes \(DTCs\), or Battery Warning Lamp On
- [9003081](/bulletins/10229871.md), 2023-01-17, Service bulletin: ELECTRICAL SYSTEM. Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material\(silicone\) is not compatible with this grease and can cause deterioration over time.
- [3100122](/bulletins/10229572.md), 2023-01-09, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [0801215](/bulletins/10229190.md), 2023-01-09, Service bulletin: STRUCTURE; ELECTRICAL SYSTEM. Intermittent Battery Drain This bulletin involves reprogramming the Body Control Module \(BCM\) with updated software. A small number of customers may experience a battery drain after the vehicle sits for a long period of time.
- [3100122](/bulletins/10225424.md), 2022-10-31, Service bulletin: STRUCTURE. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [3100122](/bulletins/10225287.md), 2022-10-31, Service bulletin: STRUCTURE:INTERIOR PANELS:DOOR; STRUCTURE; UNKNOWN OR OTHER. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding \(STRSW\) and Gas Metal Arc Welding \(GMAW\) processes when welding steel body panels and structural components.
- [9004386](/bulletins/10221228.md), 2022-09-26, Service bulletin: ELECTRICAL SYSTEM:WIRING. WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content

JSON: [/v1/bulletins/10139661](/v1/bulletins/10139661)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2008-051-14&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10139661&vehicle=Service%20bulletin%2008-051-14)