# Service bulletin 23\-007\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10138995
- Published by NHTSA: 2018\-06\-04
- Manufacturer's number: 23\-007\-13
- Manufacturer's date: 2013\-02\-20
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION \(PRNDL\); EQUIPMENT

## NHTSA's summary

Mopar '11 Shifter Handle Contacting Bezel This bulletin involves shimming the rear of the shifter to eliminate contact with the shifter bezel and if necessary replacing the shifter bezel if damage has occurred. The customer may experience the shifter contacting the shifter bezel when the shifter is placed into drive.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10138995-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10138995-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Equipment and accessories, Transmission and driveline, Automatic transmission

## Vehicles listed

- 2011 DODGE CHARGER

## Other bulletins for the same vehicles and component

- [S1709000010](/bulletins/10229031.md), 2023-01-09, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [V51](/bulletins/10228020.md), 2022-12-19, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER. Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- [1806715REVA](/bulletins/10218133.md), 2022-08-22, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: PCM Software Enhancements.
- [1808515](/bulletins/10215176.md), 2022-07-05, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). This bulletin involves selectively erasing and reprogramming the Powertrain Control
- [9004509](/bulletins/10212248.md), 2022-05-31, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN. Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- [18\-067\-15 REV A](/bulletins/10159945.md), 2019-05-20, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: PCM Software Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes \(DTCs\) set in the Powertrain Control Module \(PCM\): ? U0140 \- Lost Communication With Body Control Module. ? U0401 \- Implausible Data Received From ECM/PCM. ? P0441 \- Evap Purge System Performance. ? P0340 \- Camshaft Position Sensor Circuit \- Bank 1 Sensor 1. This software update also has improvements for fuel pump relay cycling during remote starts.
- [18\-031\-12 REV. A](/bulletins/10136494.md), 2018-05-14, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ELECTRICAL SYSTEM:SOFTWARE. Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that P0108 \- Manifold Absolute Pressure Sensor Circuit High has been set active or stored.Updating the software will correct the condition listed above.
- [18\-031\-12 REV. A](/bulletins/10128942.md), 2018-02-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash: MIL Illumination P0108 \- Manifold Absolute Pressure Sensor Circuit High This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. The customer may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that P0108 \- Manifold Absolute Pressure Sensor Circuit High has been set active or stored.Updating the software will correct the condition listed above.

JSON: [/v1/bulletins/10138995](/v1/bulletins/10138995)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2023-007-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10138995&vehicle=Service%20bulletin%2023-007-13)