WenmarOpen by Wenmar Pro

Service bulletin 37030

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10137765
Published by NHTSA2018-05-21
Manufacturer's number37030
Manufacturer's date2016-04-21
NHTSA componentSEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER; POWER TRAIN:AUTOMATIC TRANSMISSION; SEATS; ENGINE

NHTSA's summary

37030 ? Service Update Bulletin. On vehicles equipped with the automatic transmission option and the heated and ventilated front seat option, while the engine is running during a remote start and the remote start heated and ventilated seat feature is turned on in the vehicle personalization menu, the heated and ventilated seats may not activate. Dealers are to reprogram the body control module.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine, Seats, Transmission and driveline, Automatic transmission

Vehicles listed
CHEVROLET CORVETTE2016

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
15NA0452023-12-11. Service bulletin. Rattle Noise Heard From Engine Bell Housing
17-NA-0662023-07-25. Service bulletin. This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
PIP5621C2022-10-17. Service bulletin. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
15-NA-0832021-09-07. Service bulletin. Recovery Process from a Controller Reprogramming Interruption
06-00-89-031D2021-09-07. Service bulletin. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
990420002L2021-08-09. Service bulletin. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
06-00-89-031D2021-04-20. Service bulletin. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
15-NA-0832021-04-20. Service bulletin. Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM
17-NA-3112021-04-14. Service bulletin. Rattle Type Noise/Sound from the Drive Support Assembly (DSA) Condition Some customers may comment on a rattle type noise. Further investigation will reveal the noise is originating from the drive support assembly area. Cause This may be due to the propeller shaft hub clamp bolt coming loose. Correction Replace the propeller shaft hub clamp bolt.
16-NA-1752021-04-13. Service bulletin. SHAKE AND/OR SHUDDER DURING LIGHT THROTTLE ACCELERATION BETWEEN 40 AND 128 KM/H (25 AND 80 MPH) AT A STEADY STATE.