Service bulletin 17NA269
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10137570 |
| Published by NHTSA | 2018-05-21 |
| Manufacturer's number | 17NA269 |
| Manufacturer's date | 2018-04-18 |
| NHTSA component | BACK OVER PREVENTION |
NHTSA's summary
This Technical bulletin provides information on new software to correct the rear camera display being too bright.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| CHEVROLET COLORADO | 2018 |
|---|---|
| CHEVROLET S10 | 2018 |
| CHEVROLET SILVERADO | 2017 |
| CHEVROLET SILVERADO 2500 | 2018 (the catalog's model; the bulletin names a series or trim of it) |
| CHEVROLET SUBURBAN | 2017, 2018 |
| CHEVROLET TAHOE | 2017, 2018 |
| CHEVROLET TRAILBLAZER | 2018 |
| GMC CANYON | 2018 |
| GMC SIERRA | 2017 |
| GMC SIERRA 2500 | 2018 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA DENALI | 2018 (the catalog's model; the bulletin names a series or trim of it) |
| GMC TERRAIN | 2018 |
| GMC YUKON | 2017, 2018 |
| GMC YUKON XL | 2017, 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PIT6140 | 2024-04-15. Service bulletin. This preliminary information discusses potential camera functional issues if the camera is not properly programmed. |
|---|---|
| 18-NA-176 | 2024-02-02. Service bulletin. This technical bulletin provides a procedure to add reflective butyl tape to the rear driver's side module to correct the radar reflection being detected and triggering the false alerts. |
| PIT5386J | 2024-01-29. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| PIP5395G | 2023-08-21. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced. |
| PIT5544G | 2023-06-13. Service bulletin. This Preliminary information communicates information on a hydrauilc rush type noise from the power steering gear. This noise is a characteristic of the new Active Hydraulic Assist System RPO NV8 and no repairs should be made. The noise is most noticeable in the cab at idle, in park, with all accessories turned off. |
| 17-NA-331 | 2023-04-06. Service bulletin. This service bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option. |
| PIP5623 | 2023-03-13. Service bulletin. This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. |
| 17-NA-331 | 2023-02-28. Service bulletin. This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option. |
| PIT5386H | 2023-02-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| 070601016G | 2022-06-13. Service bulletin. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |