# Service bulletin B340218

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10136342
- Published by NHTSA: 2018\-05\-07
- Manufacturer's number: B340218
- Manufacturer's date: 2018\-03\-01
- NHTSA component: ENGINE

## NHTSA's summary

DSC FAULT D34487 SETTING MIL: The Check Engine Light is illuminated with no OBD relevant faults stored.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10136342-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10136342-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2017 BMW F800 R
- 2018 BMW S1000 R
- 2018 BMW X5 M

## Recalls for the same vehicles and component

- [2024705](/recalls/tc/2024705.md), 2024-11-19: Engine

## Other bulletins for the same vehicles and component

- [SIB090121](/bulletins/10215750.md), 2022-07-18, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE; ELECTRICAL SYSTEM:SOFTWARE. BMW offers a new special ISTA Installation made available for Roadside Assistance / Mobile Service technicians. The new ISTA Version is also able to be used in case of a Remote Software Upgrade \(RSU\) programming failure to get the customer car reprogrammed on site. In case of a Remote Software Upgrade failure, the engine start is prevented for safety reasons until the vehicle is programmed correctly. Most of the errors occur when only one control unit fails to program correctly.
- [B110521](/bulletins/10212784.md), 2022-05-31, Service bulletin: FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. The belt pulley on the mechanical coolant pump may fracture allowing the engine drive belt to come off the coolant pump and alternator.
- [B662419](/bulletins/10206690.md), 2022-01-24, Service bulletin: ELECTRICAL SYSTEM; ENGINE; STEERING. Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
- [B121021](/bulletins/10205613.md), 2021-12-27, Service bulletin: ELECTRICAL SYSTEM; ENGINE. The customer complains that under moderate throttle application or on deceleration after throttle application, a Malfunction Indicator Lamp \(MIL\) is displayed in the instrument cluster.
- [B611421](/bulletins/10205093.md), 2021-12-20, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. The BMW Gesture Control function may fail permanently as a result of high temperature fluctuations.
- [SIB 62 03 21](/bulletins/10202474.md), 2021-10-25, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING. When the vehicle is operated in Sport Mode, the engine speed is no longer displayed in the BMW Head\-Up Display \(HUD\).
- [B610421](/bulletins/10200237.md), 2021-08-09, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; ENGINE. The customer may complain of a check control message stating "Safe share detected" \(CCM\-ID 953\). Check control message can be verified by checking key reader information or performing the Check control message history service function.
- [B512219](/bulletins/10200232.md), 2021-08-09, Service bulletin: EQUIPMENT; ENGINE; EQUIPMENT ADAPTIVE/MOBILITY. Upon visual inspection, the passenger side upper active air flaps are either stuck open or closed, and they will not move.
- [B110120](/bulletins/10200228.md), 2021-08-09, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:FILTER/SCREEN. On rare occasions during an engine oil service, the BMW Original \(Genuine\) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing.
- [B110321](/bulletins/10199292.md), 2021-07-19, Service bulletin: EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. B58 ENGINE: ENGINE OIL FILTER REMOVAL PROCEDURE AND TOOLS . A. For the B58 engines, a BMW Oil Catch special tool for use in conjunction with removing the engine oilfilter insert is now available.

JSON: [/v1/bulletins/10136342](/v1/bulletins/10136342)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20B340218&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10136342&vehicle=Service%20bulletin%20B340218)