Service bulletin PI1447
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10135406 |
| Published by NHTSA | 2018-05-07 |
| Manufacturer's number | PI1447 |
| Manufacturer's date | 2015-03-23 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
This preliminary informational bulletin provides diagnostic tips for a customer concern of Malfunction Indication Lamp (MIL) illuminated, and a technician may find DTC P0741 set: Torque Converter Clutch Stuck Off
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
Trouble codes named
P0741
| CHEVROLET COLORADO | 2015 |
|---|---|
| GMC CANYON | 2015 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PI0281L | 2025-06-12. Service bulletin. This preliminary informational (PI) bulletin provides information to dealership personnel that may be helpful when addressing underbody component corrosion with customers. |
|---|---|
| PIP5175F | 2025-02-10. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have a delayed engagement into drive, shudder at a launch, or the transmission is slipping when shifting into 1st, 2nd, 3rd or 4th gears. This may be due to loose stator support to pump cover bolts causing a leak at the stator support to pump cover gasket. Technician will check for the bolts to be loose. If any of the bolts are loose or the gasket is misaligned or leaking, the transmission pump cover must be replaced and the 1234 clutch plates should be inspected for being distressed and repaired as needed. |
| 09-06-04-026Z | 2025-01-23. Service bulletin. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 08-07-30-035I | 2024-12-19. Service bulletin. This service bulletin provides information on the harmful effects of ethylene glycol in transmission fluid. |
| 04-06-01-029K | 2024-12-04. Service bulletin. This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules. |
| 20-NA-138 | 2024-11-05. Service bulletin. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management. |
| 08-07-30-026I | 2024-10-24. Service bulletin. This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 23-NA-142 | 2024-10-17. Service bulletin. This technical bulletin provides a procedure for the techs to replace the forward check ball and separator plate if found the cause of the customers concern of No Forward Gear When Shifting from Park to Drive and/or Reverse to Drive. |
| 23-NA-142 | 2024-08-16. Service bulletin. This technical bulletin provides a procedure for the techs to replace the forward check ball and separator plate if found the cause of the customers concern of No Forward Gear When Shifting from Park to Drive and/or Reverse to Drive. |
| 24-NA-141 | 2024-08-15. Service bulletin. GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return. |