# Service bulletin B661317

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10135049
- Published by NHTSA: 2018\-04\-23
- Manufacturer's number: B661317
- Manufacturer's date: 2018\-02\-01
- NHTSA component: BACK OVER PREVENTION

## NHTSA's summary

SURROUND VIEW CAMERA DISPLAYS INCORRECT VEHICLE MODEL: After programming the vehicle, the incorrect vehicle model is displayed in the CID \(Central Information Display\) when surround view camera function is active.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2018/MC-10135049-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2018/MC-10135049-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2017 BMW 530I
- 2017 BMW 540I
- 2016 to 2018 BMW 740LI
- 2016 to 2018 BMW 750LI
- 2017 BMW F800 R
- 2017 to 2018 BMW M760LI
- 2018 BMW R1200 R
- 2018 BMW S1000 R
- 2018 BMW X3
- 2018 BMW X5 M
- 2018 BMW X6 M

## Recalls for the same vehicles and component

- [19V684000](/recalls/nhtsa/19V684000.md), 2019-09-27: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [B650414](/bulletins/10227568.md), 2022-12-12, Service bulletin: LANE DEPARTURE; UNKNOWN OR OTHER; AIR BAGS; SEATS:BARRIERS; BACK OVER PREVENTION. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 \- Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C \- Front passenger seat occupancy detection transmitting fault\(moisture\)" is stored. The fault may or may not currently be present.
- [B090321](/bulletins/10214254.md), 2022-06-21, Service bulletin: BACK OVER PREVENTION:SOFTWARE. In some rare cases a customer vehicle might be excluded from one or more Remote Software Upgrade\(RSU\) campaigns. This SIB gives an overview how to identify these vehicles and how to proceed in case of a customer complaint.
- [B320420](/bulletins/10205616.md), 2021-12-27, Service bulletin: BACK OVER PREVENTION. A groaning type noise is heard during the height adjustment.
- [B121221](/bulletins/10205615.md), 2021-12-27, Service bulletin: BACK OVER PREVENTION. ???Due to an unfavorable operating point primarily in the low\-end torque range, the fuel vapor scavenging that takes place in that range may result in incorrect detection of a mixture that is too rich. As a result, an incorrect mixture adaptation value is stored.
- [MC110821](/bulletins/10200256.md), 2021-08-09, Service bulletin: BACK OVER PREVENTION; AIR BAGS. Warning light and fault message in the TFT with faults stored for the rear oxygen sensor \(after the catalytic converter\). The failure usually occurs shortly after the vehicle handover or the running\-in check
- [B662919](/bulletins/10190867.md), 2021-04-26, Service bulletin: BACK OVER PREVENTION. TOP VIEW CAMERA IMAGE IS MISALIGNED: The top view image of the vehicle is misaligned when observed in the Control Information Display \(CID\).
- [B640121](/bulletins/10190864.md), 2021-04-26, Service bulletin: BACK OVER PREVENTION. WHISTLING NOISE COMING FROM FRESH AIR INLET \(ENGINE COMPARTMENT\): A whistling noise is present from the fresh air inlet area \(engine compartment bulkhead area\), in the right front area of the vehicle, at speeds above 40 mph.
- [B090120](/bulletins/10190846.md), 2021-04-26, Service bulletin: BACK OVER PREVENTION:SOFTWARE. BMW REMOTE SOFTWARE UPGRADE IS NOT OFFERED FOR INSTALLATION: The customer complains that the BMW Remote Software Upgrade \(RSU\) is not possible in his/her vehicle, though the Remote Software Upgrade menu is available in the vehicle and a download was performed by the vehicle or the BMW Connected App.
- [B662919](/bulletins/10184595.md), 2020-12-21, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM; EQUIPMENT. TOP VIEW CAMERA: The top view image of the vehicle is misaligned when observed in the Control Information Display \(CID\). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both.
- [B661720](/bulletins/10184594.md), 2020-12-21, Service bulletin: BACK OVER PREVENTION. SURROUND VIEW \- PARKING VIEW IMAGES DISPLAYED INCORRECTLY: After programming and shifting into reverse, there may be various sporadic concerns regarding the rearview camera and the surround view \(top view\) camera images in the CID \(Central Information Display\).

JSON: [/v1/bulletins/10135049](/v1/bulletins/10135049)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20B661317&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10135049&vehicle=Service%20bulletin%20B661317)