# Service bulletin PI0993

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10134720
- Published by NHTSA: 2018\-04\-23
- Manufacturer's number: PI0993
- Manufacturer's date: 2013\-06\-11
- NHTSA component: STEERING:COLUMN

## NHTSA's summary

This preliminary informational bulletin provides information for Service Column Lock DIC Message with DTC B101D Stored concern.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10134720-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10134720-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Steering, Steering column and wheel

## Trouble codes named

B101D

## Vehicles listed

- 2013 CADILLAC ATS

## Other bulletins for the same vehicles and component

- [18207 01](/bulletins/10212573.md), 2022-05-31, Service bulletin: STEERING:ELECTRIC POWER ASSIST SYSTEM; STEERING:COLUMN; STEERING. Customer Satisfaction. Certain vehicles may have a condition in which the power steering gear motor could separate from the steering gear housing due to corrosion of the attaching bolts. If the motor separates, power steering assist may be reduced or lost, and the driver may experience an unexpected increase in steering effort, especially at low speeds. Replace the bolts that attach the electric power steering motor to the steering gear and add a protective wax coating to each bolt and the seam around the electric power steering motor. If the bolts cannot be removed due to corrosion, the steering gear must be replaced. \*\* Revised Parts Information \*\*
- [18207](/bulletins/10212570.md), 2022-05-31, Service bulletin: POWER TRAIN; STEERING:ELECTRIC POWER ASSIST SYSTEM; FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; WHEELS; STEERING; AIR BAGS; ENGINE AND ENGINE COOLING; STEERING:COLUMN. Customer Satisfaction. Certain vehicles may have a condition in which the power steering gear motor could separate from the steering gear housing due to corrosion of the attaching bolts. If the motor separates, power steering assist may be reduced or lost, and the driver may experience an unexpected increase in steering effort, especially at low speeds. Replace the bolts that attach the electric power steering motor to the steering gear and add a protective wax coating to each bolt and the seam around the electric power steering motor. If the bolts cannot be removed due to corrosion, the steering gear must be replaced.
- [PIC6025D](/bulletins/10160993.md), 2019-06-10, Service bulletin: STEERING; STEERING: STEERING WHEEL/HANDLE BAR. This Preliminary Information communication provides the technician with a diagnostic tip for vehicles with intermittent no crack with a "Turn Steering Wheel Start Vehicle Again". If there is a Diagnostic Trouble Code B305A stored history in the Body Control Module it may have been caused by a bound up steering wheel. Review the owner?s manual Starting the Vehicle Messages section with the customer.
- [PIC5784](/bulletins/10112604.md), 2017-08-15, Service bulletin: ELECTRICAL SYSTEM:IGNITION; STEERING:COLUMN. This Preliminary Information communication provides information to the technician a grunt or buzz noise heard from the steering column area when the Ignition is turned on and again when the Ignition is turned off and the driver door is opened. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
- [PIC6025](/bulletins/10112249.md), 2017-08-15, Service bulletin: STEERING: STEERING WHEEL/HANDLE BAR; STEERING:COLUMN; STEERING. This Preliminary Information communication provides information to the technician about vehicles that has an intermittent no crank with a "Turn Steering Wheel Start Vehicle Again" message. If the steering is bound up so the column lock cannot retract when the vehicle start button is pressed the Body Control Module will not allow the vehicle to start. Dealer should review the owner's manual description for this message in the Starting the Vehicle Messages section which states: "TURN STEERING WHEEL START VEHICLE AGAIN" with the customer.
- [PIC\-6025\-A](/bulletins/10078913.md), 2016-08-25, Service bulletin: STEERING: STEERING WHEEL/HANDLE BAR; STEERING. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH A DIAGNOSTIC TIP FOR VEHICLES WITH INTERMITTENT NO CRACK WITH A "TURN STEERING WHEEL START VEHICLE AGAIN". IF THERE IS A DIAGNOSTIC TROUBLE CODE B305A STORED HISTORY IN THE BODY CONTROL MODULE IT MAY HAVE BEEN CAUSED BY A BOUND UP STEERING WHEEL. REVIEW THE OWNER’S MANUAL STARTING THE VEHICLE MESSAGES SECTION WITH THE CUSTOMER.
- [SB\-PIC\-5762](/bulletins/10071339.md), 2016-06-13, Service bulletin: STEERING: STEERING WHEEL/HANDLE BAR. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
- [SB\-PIC\-5729](/bulletins/10071315.md), 2016-06-13, Service bulletin: STEERING: STEERING WHEEL/HANDLE BAR. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

JSON: [/v1/bulletins/10134720](/v1/bulletins/10134720)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PI0993&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10134720&vehicle=Service%20bulletin%20PI0993)