Service bulletin TSBTRA059_R3
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10133183 |
| Published by NHTSA | 2018-04-16 |
| Manufacturer's number | TSBTRA059_R3 |
| Manufacturer's date | 2018-03-21 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
TSB - HCU/TCU UPGRADE ? FOR 100MESH SOLENOID EQUIPPED HYBRID TRANSMISSIONS - This bulletin has been revised to include additional information. This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016MY Optima Hybrid (TF HEV) after replacement of the transmission with improved 100 mesh solenoids has taken place. To apply the improved logic, the HCU/TCU should be reprogrammed using the KDS download, as described in this bulletin.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| KIA OPTIMA HYBRID | 2011, 2012, 2013, 2014, 2015, 2016 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2016514 | 2016-10-18. Powertrain |
|---|---|
| 16V705000 | 2016-10-03. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| TSB_TRA046_R5 | 2025-04-23. Service bulletin. TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission. |
|---|---|
| TSB_TRA046_R4 | 2024-06-04. Service bulletin. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced. |
| TSB_TRA072_R5 | 2023-12-05. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units. |
| TSB_TRA072_R4 | 2023-07-05. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units. |
| TSB_TRA072_R4 | 2023-07-05. Service bulletin. TECHNICAL SERVICE BULLETIN: SERVICE ACTION: INHIBITOR SWITCH REPLACEMENT (SA317B/C) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units. |
| TSB_TRA046_R3 | 2022-12-06. Service bulletin. TECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2. |
| TSB_TRA098 | 2021-09-03. Service bulletin. TECHNICAL SERVICE BULLETIN: 7-SPEED DUAL CLUTCH TRANSMISSION (DCT) ANTI-JUDDER LOGIC IMPROVEMENT - This bulletin provides the procedure to update the software logic of the Dual Clutch Transmission (DCT) system on some 2016-2020MY Optima (JFa) vehicles produced from August 28, 2015 through June 1, 2020, equipped with Gamma 1.6L T-GDI engine and 7-speed DCT, which might exhibit clutch judder when accelerating from a stop. |
| TSB_TRA083_R1 | 2021-09-03. Service bulletin. TECHNICAL SERVICE BULLETIN: 7-SPEED DCT JUDDER INSPECTION AND DUAL CLUTCH ASSEMBLY REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace Dual Clutch Assembly and upgrade the TCU on some 2016-2020MY Kia vehicles listed in the table below, equipped with the 7 Speed Dual Clutch Transmission (DCT), which might exhibit clutch judder when accelerating from a stop. |
| TSB_TRA083 | 2021-01-06. Service bulletin. TECHNICAL SERVICE BULLETIN: 7-SPEED DCT JUDDER INSPECTION AND DUAL CLUTCH ASSEMBLY REPLACEMENT - This bulletin provides the procedure to replace Dual Clutch Assembly and upgrade the TCU on some 2016-2020MY Kia vehicles listed on the table below, equipped with the 7 Speed Dual Clutch Transmission (DCT), which might exhibit clutch judder when accelerating from a stop. If the vehicle body vibrates without the steering wheel shuddering when performing creep driving test (driving the vehicle up to 3mph), the vehicle is exhibiting clutch judder. The creep test can be conducted by driving at a speed slower than 5 mph after releasing the brake. |
| TSB_TRA059 | 2020-12-04. Service bulletin. TECHNICAL SERVICE BULLETIN: HCU/TCU UPGRADE - FOR 100 MESH SOLENOID EQUIPPED HYBRID TRANSMISSIONS -This bulletin provides information related to a software upgrade of the Hybrid Control Unit (HCU) and the Transmission Control Unit (TCU) of some 2011-2016 MY Optima Hybrid (TF HEV) vehicles after replacement of the transmission with improved 100 mesh solonoid filters has taken place. To apply the improved logic, the HCU/TCU should be reprogrammed using the GDS/KDS download, as described in this bulletin. |