Service bulletin T-SB-0302-17
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10132704 |
| Published by NHTSA | 2018-04-02 |
| Manufacturer's number | T-SB-0302-17 |
| Manufacturer's date | 2017-10-25 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
TSB: Some 2005 ? 2011 model year Tacoma vehicles may exhibit a condition where there is a drivetrain vibration and/or drivetrain noise.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| TOYOTA TACOMA | 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 10V042000 | 2010-02-18. POWER TRAIN:DRIVELINE:DRIVESHAFT |
|---|---|
| 2010043 | 2010-02-12. Powertrain |
| 07V324000 | 2007-07-26. POWER TRAIN:DRIVELINE |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| TSB011219 | 2023-10-16. Service bulletin. TSB: Some 2005 ? 2023 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released. |
|---|---|
| ZH2-POL17-16 | 2021-06-14. Service bulletin. There is a drivetrain vibration and/or noise. |
| T-SB-0112-19 | 2019-09-16. Service bulletin. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0186-12. * Applicability has been updated to include 2018 and 2019 model year Tacoma vehicles. * The entire bulletin has been updated. Service Bulletin No. T-SB-0186-12 is obsolete and any printed versions should be discarded. Some 2005 - 2019 model year Tacoma vehicles equipped with a manual transmission may exhibit a squeak or creak noise from the clutch pedal when it is depressed or released. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0134-16-Rev | 2019-09-03. Service bulletin. TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit |
| T-SB-0302-17-Rev | 2018-12-17. Service bulletin. TSB: REVISION NOTICE March 14, 2018 Rev1: ? The Production Change Information and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2005 ? 2011 model year Tacoma vehicles may exhibit a condition where there is a drivetrain vibration and/or drivetrain noise. Follow the procedure in this bulletin to address this condition. |
| ZH2-Toyota POL17 | 2018-12-03. Service bulletin. Customer Support Program: Toyota has received reports in which customers have indicated that there is a drivetrain vibration and/or drivetrain noise. If the vehicle continues to be driven with the aforementioned condition, there is risk of severe damage to the propeller shaft. |
| ZH2-Toyota POL17 | 2018-11-05. Service bulletin. Warranty Policy Bulletin: Toyota has received reports in which customers have indicated that there is a drivetrain vibration and/or drivetrain noise. If the vehicle continues to be driven with the aforementioned condition, there is risk of severe damage to the propeller shaft. |
| T-SB-0302-17-Rev | 2018-10-22. Service bulletin. TSB: REVISION NOTICE June 27, 2018 Rev2: ? The Production Change Information and the Parts Information sections have been updated. March 14, 2018 Rev1: ? The Production Change Information and Repair Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2005 ? 2011 model year Tacoma vehicles may exhibit a condition where there is a drivetrain vibration and/or drivetrain noise. Follow the procedure in this bulletin to address this condition. |
| ZH2_Toyota POL17 | 2018-07-16. Service bulletin. Warranty Policy Bulletin: Toyota has received reports in which customers have indicated that there is a drivetrain vibration and/or drivetrain noise. If the vehicle continues to be driven with the aforementioned condition, there is risk of severe damage to the propeller shaft. |
| T-SB-0026-15_Rev | 2018-07-16. Service bulletin. TSB: REVISION NOTICE June 8, 2018 Rev2: ? Applicability has been updated to exclude 2016 ? 2017 model year Tacoma vehicles. ? The Repair Procedure section has been updated. May 15, 2017 Rev1: ? Applicability has been updated to include 2016 ? 2017 model year Tacoma and 4Runner vehicles. ? The Introduction section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2004 ? 2017 model year 4Runner vehicles, 2007 ? 2014 model year FJ Cruiser vehicles, and 2005 ? 2015 model year Tacoma vehicles equipped with part-time 4WD may exhibit a cyclical groaning or grinding noise coming from the front differential in 2WD that goes away when operated in 4WD. This noise can be addressed by replacing the needle bearing on the left side of the front differential. Refer to the Repair Procedure for needle bearing roller replacement instructions. |