Service bulletin T-SB-0289-17

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10132666
Published by NHTSA	2018-04-02
Manufacturer's number	T-SB-0289-17
Manufacturer's date	2017-10-05
NHTSA component	POWER TRAIN

NHTSA's summary

TSB: Some 2014 - 2017 model year Corolla and 2017 model year iM vehicles may exhibit a MIL "ON" condition with Diagnostic Trouble Code (DTC) P2820 present, indicating a Pressure Control Solenoid (shift solenoid valve SLP) Performance condition. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been updated to prevent this condition.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Trouble codes named

P2820

Vehicles listed
TOYOTA COROLLA	2014, 2015, 2016, 2017
TOYOTA COROLLA IM	2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
JSD-082118	2021-06-14. Service bulletin. An electric control unit has improper programming.
J0D-032818	2021-06-14. Service bulletin. Transmission has improper programming.
T-SB-0150_16_Rev	2019-10-15. Service bulletin. TSB: REVISION NOTICE September 03, 2019 Rev1: ? Applicability has been updated to include 2018 ? 2019 model year Corolla vehicles. Any previous printed versions of this bulletin should be discarded. Some 2014 ? 2019 model year CK313 CVT Corolla vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P2757 (Torque Converter Clutch Pressure Control Solenoid Performance [Shift Solenoid Valve SL]). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0134-16-Rev	2019-09-03. Service bulletin. TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-SB-0016-19	2019-02-19. Service bulletin. TSB: Some 2014 ? 2018 model year Corolla and 2017 ? 2018 model year iM vehicles equipped with the K313 Continuously Variable Transaxle (CVT) may exhibit a high-pitched hiss or whine noise after the vehicle has reached normal operating temperature. This condition may be caused by the valve body plate inside the CVT assembly. Follow the Repair Procedure in this bulletin to address this condition.
J0D Region Lette	2018-12-17. Service bulletin. Region Letter: The subject vehicles? transmission has improper programming that could lead a component to unnecessarily cycle and experience abnormal wear. If this component becomes damaged, the malfunction indicator lamp may illuminate in the instrument cluster and the vehicle could experience a reduction of speed. After reaching a pre-determined gear ratio, the vehicle can be operated up to approximately 37 mph.
J0D Dealer Lette	2018-12-17. Service bulletin. Dealer Email: The subject vehicles? transmission has improper programming that could lead a component to unnecessarily cycle and experience abnormal wear. If this component becomes damaged, the malfunction indicator lamp may illuminate in the instrument cluster and the vehicle could experience a reduction of speed. After reaching a pre-determined gear ratio, the vehicle can be operated up to approximately 37 mph.
J0D Region Email	2018-12-17. Service bulletin. Region Email: The subject vehicles? transmission has improper programming that could lead a component to unnecessarily cycle and experience abnormal wear. If this component becomes damaged, the malfunction indicator lamp may illuminate in the instrument cluster and the vehicle could experience a reduction of speed. After reaching a pre-determined gear ratio, the vehicle can be operated up to approximately 37 mph.
JSD-Technical In	2018-12-03. Service bulletin. Technical Instructions: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN JSD CONTINUOUSLY VARIABLE TRANSAXLE SOFTWARE UPDATE CERTAIN 2014-2017 TOYOTA Corolla CERTAIN 2017 TOYOTA Corolla iM CERTAIN 2016 SCION iM UPDATE 8-20-2018
JSD-Dealer Lette	2018-12-03. Service bulletin. Dealer Letter: August 13, 2018. ? A section has been added which clarifies the process for obtaining DSPM approval for out-of-warranty CVT assembly replacement. ? Clarification has been added to the parts ordering process for CVT assembly replacement to highlight that the CVT assembly parts ordering process is applicable regardless of warranty coverage. ? The descriptions for OpCodes JSD021 and JSD020 have been clarified. Toyota previously announced Special Service Campaign J0D, which involved performing a software update to the CVT control software to address the condition described below. Following the completion of the software update in Special Service Campaign J0D, Toyota dealers received reports from some customers stating that the vehicle experienced harsh shifting and/or abnormal engine RPM between shifts. These issues occurred close to the completion date of the campaign and/or within relatively low mileage from the completion of the campaign remedy, prompting Toyota to suspend Special Service Campaign J0D. Toyota has now identified the cause of these issues and has developed a new remedy. Special Service Campaign JSD, which replaces Special Service Campaign J0D, applies this new remedy. Owners of all vehicles previously involved in Special Service Campaign J0D, including those who have previously completed Special Service Campaign J0D, are requested to visit an authorized Toyota dealer to have Special Service Campaign JSD performed.