# Service bulletin T\-SB\-0187\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10131992
- Published by NHTSA: 2018\-04\-02
- Manufacturer's number: T\-SB\-0187\-13
- Manufacturer's date: 2013\-12\-20
- NHTSA component: ELECTRONIC STABILITY CONTROL \(ESC\); BACK OVER PREVENTION

## NHTSA's summary

Some 2006 ? 2012 model year RAV4 vehicles may exhibit a clunking noise coming from the rear of the vehicle. Upon inspection, one or both of the rear stabilizer links may be damaged. Follow the repair in this bulletin to address this condition.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10131992-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10131992-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2006 to 2012 TOYOTA RAV4

## Other bulletins for the same vehicles and component

- [TTT063620](/bulletins/10214323.md), 2022-06-21, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care \(TCMC\) brake pads may exhibit a groan or squeak noise in various driving conditions
- [T\-TT\-0636\-20 Rev](/bulletins/10190453.md), 2021-04-19, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care \(TCMC\) brake pads may exhibit a groan or squeak noise in various driving conditions.
- [T\-SB\-0125\-20](/bulletins/10187248.md), 2021-02-16, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION. TSB: Toyota models equipped with the Premium HDD Navigation \(AVN/AW\-EMV\) system will periodically require an update to the Gracenote® database. Gracenote® includes detailed information for songs \(genre, artist, song title, album name, etc.\). The Gracenote® update will be included on the USB Drive Navigation Map Update SST. A Gracenote® update must be performed before a Navigation Map update. A Navigation Map update is not required to complete the Gracenote® update. Use the process described in this bulletin to perform the update.
- [T\-TT\-0636\-20](/bulletins/10187241.md), 2021-02-16, Service bulletin: BACK OVER PREVENTION; SERVICE BRAKES. TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care \(TCMC\) brake pads may exhibit a groan or squeak noise in various driving conditions.
- [T\-TT\-0010\-10 Rev](/bulletins/10132812.md), 2018-04-02, Service bulletin: BACK OVER PREVENTION; ENGINE. Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 \(Crankshaft Position Sensor Circuit\) and/or P0340 \(Camshaft Position Sensor Circuit\) due to inconsistent rotational speed of the engine's crankshaft.
- [T\-SB\-0141\-10 Rev](/bulletins/10132281.md), 2018-04-02, Service bulletin: STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT; BACK OVER PREVENTION. If a creak, tick, or rattle noise is heard at the top or bottom of the windshield, or at the top of the rear glass, the source of the noise may be the two stoppers bonded to the top of the windshield/rear glass, or the windshield retainers bonded to the lower edge of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield/rear glass area.
- [T\-SB\-0001\-10 Rev](/bulletins/10132202.md), 2018-04-02, Service bulletin: BACK OVER PREVENTION. Some vehicles may exhibit a MIL ?ON? Diagnostic Trouble Code \(DTC\) P0138 and/or P0158 \(Oxygen Sensor Circuit High Voltage Bank 1 or 2\). In some instances a P2195 or P2197 \(A/F Sensor Signal Stuck Lean\) DTC may also be present. This condition may be caused by incorrect Air Fuel Ratio Sensor response. Additionally, a P0606 \(ECM/PCM Processor\) DTC may be present due to incorrect Oxygen Sensor operation. The following repair procedures should be used to properly diagnose and repair this condition.

JSON: [/v1/bulletins/10131992](/v1/bulletins/10131992)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20T-SB-0187-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10131992&vehicle=Service%20bulletin%20T-SB-0187-13)